Duane(Pa)'s latest activity
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
I'm content with these chips, .325 husky safety chain on a 550XP in a green doug fir that blew over a few days ago. -
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
ive been cleaning the wheel in between chains, it was just one of those thoughts that roll through your brain as your doing something.
-
Got these from Stihl many years ago. They work well if you close the rails to tight. The one on top is part #1106 893 9200 | Groove...
-
They do work. Get some decent aftermarket bearings, they tend to have less radial run out than the stock thus giving a better feel...
-
Duane(Pa) replied to the thread The 2025 346xp Porting Thread.I like the 346! Subbing into this thread...
-
-
I’d say, that’s proof in the pudding.
-
Stock vs xs ported. Both have 357 carb
-
Duane(Pa) replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.Oil is the enemy. It will clog the abrasive and next thing you have is heat! Heat is what takes the temper out of teeth.
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
i took the time yesterday to read this whole thread and soak up all the info I could, I grabbed my most worn chain this morning and gave...
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
27ish/55/0 is what I came up with for my 1st chain, Im gonna bury it a piece of doug fir in a few hours and test it. I gotta admit this...
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
30/55/0 Im setting up to grind my 1st chain ever, been a hand filer my whole life, but I have to many saws and too many chains now to...
-
I have broken off plenty when they are at the end of life but this.... How the hell did they do this Good thing this chain is 1 link to...
-
I put the feeler gauges needed into the bar groove then use a hammer and a flat surface to close them. Go slightly thinner than...
-
In case anyone is interested, HL Supply is having a sale on C83, $349 per roll...
