Busa2r's latest activity
-
BBusa2r replied to the thread Anyone run 100LL A gas in a 4-mix?.There are more fairy tales and old wife stories about av/gas than stories about Sasquatch. If you are over 55 and can remember, We ran...
-
BOpen port Husky 55 and a 372 clone. I am nothing short of shocked on the 55.
-
BBesides catalytic mufflers what does 100LL harm? I've been using it in cars since the 1970s, I have SBC. at ~12:1 compression, 210lbs...
-
BIf the exhaust has a catalytic converter it will poison the catalyst. I run 100LL in all my saws unless I'm milling or going to be...
-
BStihl always had very good edge retention, because of the tooth hardness, the C83SK is good to , Oregon has had issues in quality, it's...
-
BModern "paper" tends to be coated both sides in plastic like shiny ink so it looks prettier to the consumer. That stuff won't burn...
-
BStack the wood high & deep, as the wood pyramid burns and collapses into itself, drop more firewood onto it, use big wood pieces. The...
-
B3120 Full wrap handle wanted. Must be nice or restorable no junk
-
BBusa2r replied to the thread FOUND IT 3120 Full wrap handle wanted.T
-
BI see there are some 20 inch 50 gauge loops on eBay and Byrce has 24 inch .063 gauge loops
-
BIt shows up in the 2025 stihl us catalog 3679 005 1640 should be a 100ft reel part number If you want loops, instead of 1640 at the end...
-
BBusa2r replied to the thread Stihl Square Ground.Thanks Kevin, is it still available.
-
BLump charcoal is about as additive free as you can get.
-
BWhat is the letter/ number for Stihl full comp square ground 3/8 .50ga?
-
BBusa2r reacted to srcarr52's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with
Like.
Mine was actually a 38.5mm stroke, 52mm bore = 81.76cc.