bigbadbob's latest activity
-
Things to keep in mind: Some of the early TDI motors are recommended to have a new timing belt every 40-60k. Mine had the ALH motor and... -
That old Ford was my buddy’s truck that he got for free from the family of an older guy who passed away. His family just wanted it off...
-
bigbadbob replied to the thread VW TDI talk.Had 2 of those,, the car falls apart B4 the engine dies. Make sure the EGR is turned off in software,, or the intake gets gummed up real...
-
bigbadbob reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Love.
New in my collection: DOLMAR PS-401 built 1996, never used, never assembled and never fuelled, with original box and accessories. -
If you don't get a better offer, bring it Saturday and I'll do some swapping with you. I think Sam needs some soft plastics and jig heads.
-
And, home made.
-
I have a cheapy one in the shop. Funny thing was I was texting pictures of it to a friend about it. Might be something for Sam to get...
-
Well....I'll be a monkey's uncle. I'd'a never guessed that. You need one?
-
Fly tying vise.
-
. Here's a thing.....
-
I don't know if the factories are using any sort of shielding gas surrounding the welding zones. That would be my first question about...
-
If you aren't losing much more than a little bit needed to get the ends dressed back square and clean, You're probably good. If you hit...
-
Speaking from metal cutting mostly. I'd say the weld was a bit more common to break. But one or two missing or badly damaged teeth could...
-
I used to do a little work for a guy who was in Architectural salvage. Lots of re-sawn lumber there. Probably 25 years ago, I got to...
-
Interesting, thanks for sharing. I've never attempted to weld a blade, just buy em in bulk for the sawmill. Like so......
