bigbadbob's latest activity
-
Had to fly to Canada to collect the kids from their grandparent's place, and didn't want to check a bag. I'm never without a knife in my... -
-
-
I can work on others peoples broken clapped out as stuff for weeks on end and have very little troubles, but the second I work on my own...
-
I know you have already been over it 1000 times and probably know more than any of us providing ideas but. Fuel pressure could still be...
-
Based off the plugs and header temps cylinders 1, 3, and 5 are not firing. One would never know it based off sound or vibration of the...
-
I did. It didnt change anything, which I expected. While I had the plugs out I did a compression test, which was fine. My next plan is...
-
@redline4 did you get a chance to try the new plugs yet?
-
In the 90's, we had 2 new intakes that were flawed. We took them to the Holley trailer at a NSRA streetrod show to get them replaced...
-
Locked up 6.2 on its way out..
-
IAC position is at 100% because it is not used. Default value. I swapped a different rail of coils I had onto the left bank. No change...
-
There are a lot of humans out there that act the same way.
-
Tried that. Tried talking nice to it. Tried talking mean to it. Tried promising it good things Tried promising it really bad things. So...
-
Well, this is fun. My AFR is now in the ballpark considering I've done zero tune adjustments. But..I śhīt you not, the exhaust from...
-
Proper welding attire? Check. Not pretty but will work...
