Basher's latest activity
-
Basher replied to the thread Issue with the other site.I sent a direct message in, lets see if that works. -
If you can find a Nason dealer they can mix it for you. It’s a perfect match. It is glossy and not satin.
-
I have some. It’s two part and a perfect match. I have a few pints. It also is expensive. $70 pint. Or, you could do what I did and take...
-
I messaged them Thursday night and no reply yet
-
Basher replied to the thread Issue with the other site.Let me know on here if you have further difficulties, I can help with contacts over there.
-
Thank you for letting me know, I'll do that today.
-
Standards for the shelving are going in up front in the display area. A friend in town is busy putting the shelves together from 3/4"...
-
@Basher
-
Basher replied to the thread Issue with the other site.Quite easy, can you open the main page on AS, scroll to the very bottom and in the green bar at the bottom of the page click on, contact...
-
So I have been doing some research. and I have an early SD111. This is an image of an early SD 111 brake assembly disassembled... I need...
-
Sorry guys been working turn arounds and projects - whelp I got my 501p back together last night finally and pretty sure I hung a ring...
-
I had to look it up and evidently it's a low emissions engine .That I once worked on an early 441 that also blew out plugs .If I recall...
-
The Helicoil Sav-A-Thread kit is M14x1.25 Mark
-
Experimented with the Stihl handle tubing on a pioneer handle and it worked pretty well to replace the old stuff. 19mm size tubing if...
-
As @jacob j. noted it is a Reed-Prentice/Craftsman 1200b. If you could see on the flywheel side of the case, it will have a badge that...
