B Royals's latest activity
-
BThe bearings are not a press fit per se in the housing, they are pressed onto the crankshaft. They slide into the crankcase when the...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.I went to install my crankshaft and bearings into the side cover today, and it's not a press fit anymore. It's not sloppy per se, but...
-
BMy cannon roller nose takes a 108,i it’s 40” overall. I hate .404 skip round file chisel, square ground skip is fine. The round file...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.I have a chain question for you guys. My S797 came with a 36"(40" total length) guide bar, but no chain. It has a 7 pin .404 rim...
-
BThat is a "shield" and not really a seal. I don't think it would hurt anything to leave it in place (position the shield towards the...
-
BI think Mark @heimannm may have an answer for this (not sure if he is still traveling or back yet). If I remember correctly from a...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.Quick update. Christmas came early. I received my block and new piston from Terry today. Mark has a package in the mail for me. The...
-
-
BI have added washers, I get gold grade 8 for a metric application, they are smaller O.d. And sometimes hardened machine washers, they...
-
BI have the starter parts and flywheel nut, I will be back in the shop next week if you want to discuss further. Depending on how badly...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.I've finished cleaning all of my parts and ordered all the gaskets that will be needed. I ordered the 090 carb as well. Sawzilla has...
-
-
BI would run the 090 carb, remove the choke, and start with a prime bottle when cold. It’s just easier on this series of saw, and sp125...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.I've sent a box of parts to Terry Ives. He is going to bore and hone the cylinder and fit a new piston assembly. He is going to open...
-
BI have a pretty good supply of 57897 for $10 each + shipping. Mark
-
BThat’s what I do, I will usually rerun the outer seal, it’s more of a dust seal anyway. Little red barn sells a seal kit that include...
-
BB Royals replied to the thread Mcculloch 797, Super 797 thread.Thanks. So you only use 1 seal per side then?
