59billy's latest activity
-
I like it -
Will be a fun project with my fil over Thanksgiving while the hens cluck.
-
May just do it again. You could rebuild the top end. Get it running and be ready to kill it if it takes off on you. With it running...
-
Ok I'll go back through onan's thread and tear it down some more. Thanks. Life got real fukkin busy in a hurry around here
-
I don't let him work long, or in the heat. He stays on top of his chains. Are you saying the top end rebuild may not fix the problem...
-
The 350 does not need to be split and is not a clamshell design per say. You’re can remove the flywheel, clutch, cylinder and pull the...
-
Use 120g Emory till it’s gone. Then, go back over the entire interior with 220 and 320. 500g is a complete waste of time.
-
Yeh, for it to do that with 50:1 it 'd have to be running long and hard on a hot day with a very dull chain. May not do it then.
-
To make sure I'm following, the jug is the cylinder, the sandwich is where the metal part of the crankcase meets the two plastic sides...
-
It was most likely an air leak not your 50:1 mix. I do favor 32:1 now days though after talking with the pros on here.
-
If there is removable covers on the sides of the cyl. it is the dished 45 piston.
-
Philbert
-
I wonder how long he has been grooming his camera boy.
-
Shoot I forgot about him. Hes a good dude too.
-
59billy reacted to StihlEchoingHusky's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Ive got free port on this one right here. Chains a bit dull lol. My inability to be patient+ my astonishing super power of never...