59billy's latest activity
-
59billy reacted to Stump Shot's post in the thread Not so pros 4 new and without politics or drama with
Like.
Good morning. 40F ☁️ -
I'm interested in buying the saw how do I go about paying
-
Sending you a personal message
-
Don't hold back, that plating is tough stuff. Great first rebuild candidate you have there.
-
Keep going. Have to to remove ALL of the transfer. You're gonna be at it a while with 500 grit. After it's gone hit the bore with red...
-
Keep sanding if the spot gets bigger it's junk if it cleans up more might be ok
-
That’s definitely aluminum. Either transfer still on the plating or no plating.
-
-
So I hit it with some 500 grit, I can definitely feel a low spot with my fingers here below, and also above, the exhaust port. Not sure...
-
PM sent earlier. Did it go through?
-
Congrats!!
-
I have a box of 15 Winchester 3" rifled slugs I would like to give away to a youngster just starting out. There should be plenty to...
-
Thanks, head is still spinning a bit.
-
Kit the carb, use a 372 intake clamp. New fuel line. Clean up the stock jug and get a meteor piston. I had a quad port 45mm hyway jug...
-