What's on your bench?

[Slumberjack]

Well, in that case make the best possible running saw out of it so she's worth keeping!

Or, if You need one make a loaner saw out of it.

I have a minty 272xp I’ll sell. I’ll keep the bastard for myself

 

[Slumberjack]

Well, in that case make the best possible running saw out of it so she's worth keeping!

Or, if You need one make a loaner saw out of it.

Good idea!

 

[Agent Smith]

Buddy said his echo 450 just had no power. Well its cooked. Trying to see if the cylinder is salvageable or not.

 

[Slumberjack]

Buddy said his echo 450 just had no power. Well its cooked. Trying to see if the cylinder is salvageable or not.
View attachment 282970 View attachment 282971

I ported an echo cs450p it’s not hard to fit a 372xp carb on them. Just sayin

 

[Agent Smith]

I ported an echo cs450p it’s not hard to fit a 372xp carb on them. Just sayin

This is one of my buddies who couldn't care less about modded saws. He has no interest in it. He just wants his couple of saws working and thats it

 

[Ronie]

Working on the cylinder for my Redmax, not going to do much to it right now. After I practice a little cutting the squish band, I'll go back at it.

 

[Lightning Performance]

Working on the cylinder for my Redmax, not going to do much to it right now. After I practice a little cutting the squish band, I'll go back at it.

View attachment 282977 View attachment 282978

That will run good with added flow

 

[Lightning Performance]

It had been welded previously because of what looks like a break at some point. It’s setup for an 044 still. The bottom mounting holes line up and one of the side ones did as well. The handle was a little too wide on the side so I cut a piece of 1/8” flat at to act as a spacer. The top mounting bolt in the picture is tied through so I can get a real good clamp on it. The second mounting bolt is threaded into the stainless flatbar for real positive engagement also. The bottom screw is for extra support and utilizes the factory mounting hole. I went out today and cut some frozen birch and leaned in it pretty good. She is solid and in it for the long haul! Feels like I’m working a mini 044 out there with a ported 036 and the smaller overall size of the saw. Feels good.

I like it.

So just use a stock 044/440 wrap and it works with your mounts?

 

[Lightning Performance]

I'm about to sound old....

(It's been coming for a while! Lol!)

People are in too much of a hurry for their own good.
Some common sense and patience (which I generally lack) would solve 9/10 problems associated with travel and issues with this type of weather.

People that deal with this type of weather more than once a year get it and would barely be affected by this.

Sent from my XT1635-01 using Tapatalk

Weather has zero effect on common sense.

 

[John235]

441 that was in a flood.... I didn’t get any pictures before i started, but I’ll just say it was full of mud.


That’s another term for used as a boat anchor
Lmao.

 

[Maintenance Chief]

441 that was in a flood.... I didn’t get any pictures before i started, but I’ll just say it was full of mud.


View attachment 282889

View attachment 282890

I'm always on the look out for a cheap builder ms441!

 

[Lcfd1124]

I'm always on the look out for a cheap builder ms441!

I have a 441 that was crushed by a tree. Cases and cylinder still in good shape. Was run less than a year

 

[Agent Smith]

Had an 024 in pieces in a box. Got all the pieces cleaned and ready to reassemble. Then probably kick it on down the road

 

[Maintenance Chief]

I have a 441 that was crushed by a tree. Cases and cylinder still in good shape. Was run less than a year

I'm in pickens if you want to part with it .

 

[Lcfd1124]

I'm in pickens if you want to part with it .[/QUOT
I will. I also have a 661 complete needing a rebuild. Ill make a package deal. Pm me and ill give you my number. Im about 30-45 minutes away from you

 

[Tpagel]

Must resist....starts easy idles real nice.
Why in the F am I trying to see how to defeat the limiters and looking for ways I can open up the muffler before I even run it in wood.

Sent from my moto x4 using Tapatalk

 

[Slumberjack]

Must resist....starts easy idles real nice.
Why in the F am I trying to see how to defeat the limiters and looking for ways I can open up the muffler before I even run it in wood.

Sent from my moto x4 using Tapatalk

Mighty fine saw!

 

[Tpagel]

Mighty fine saw!

Thank you Sir

Sent from my moto x4 using Tapatalk

 

[BlackCoffin]

I like it.

So just use a stock 044/440 wrap and it works with your mounts?

It’s seems a factory 044/440 handle will line up with 3 of the 4 mounting holes on the 036. The bottom 2 and one on the side. I rigged it up like in my pictures for just a little extra stability.

 

[SawDoc441]

TS400 with bad crank bearings. I don't enjoy cutoff saws, except for the part where there's no oil tank to deal with.