What's on your bench?

[Slumberjack]

My 266/272 extra boudin is done and still breaking it in. I’m waiting on a video to load

 

[Slumberjack]

https://www.dropbox.com/s/2t2os5kdhz3hmzd/Video Feb 07, 12 49 51 PM.mov?dl=0 After breaking it in easy with a few tanks rich. I slapped a 36” bar on the 266/272 tuned it real rich an beat on it in a 44” pine to break it in good. She pulls baw!

 

[Slumberjack]

https://www.dropbox.com/s/db7wvwap99uf5aw/Video Feb 07, 2 18 50 PM.mov?dl=0 Changed to an 8t sprocket and put a 20” bar. Didn’t have time to work on a chain. This one sucks. Put a good bind on it trying to stall it though.

 

[Slumberjack]

Waking up an old Husqvarna. She is a nice old bishhh!View attachment 281641 View attachment 281642

Looking good!

 

[Slumberjack]

I ran my xs2186 in that big tree for most of the day and my 272 certainly was not even in that league but it’s the best I can do.

 

[Wilhelm]

My single core P4 desktop PC won't power up no more after having worked fine yesterday.

After having collected dust for months I powered up my Core2Quad, not bad at all.
But nothing is set up, it's running a fresh clean OS only.

I may have to give up on my old P4 as my main desktop PC.

 

[lehman live edge slab]

Anyone with experience using the 2 piece china coils for the series 1 jonsred 625? Have the neighbors saw at the house going over it and after rebuilding carb and going to tune the thing idles great and accelerated fine up to a certain point then starts missing. Almost 100% the coil is breaking down all the switch wiring looks good. Don’t like china parts but kinda the only option for these commonly failed ignitions.

 

[timg]

Symptoms sound as if you have a one piece coil flywheel with a two coil set up. I've used a couple of the chinacom two piece kits and honestly have worked well. I should have a pic saved of the two different key positions on one and two piece flys. Let me try to find the pic. You helped me out on the 020 parts awhile ago.

 

[Slumberjack]

Symptoms sound as if you have a one piece coil flywheel with a two coil set up. I've used a couple of the chinacom two piece kits and honestly have worked well. I should have a pic saved of the two different key positions on one and two piece flys. Let me try to find the pic. You helped me out on the 020 parts awhile ago.

The flywheel could be the problem for him. I have the China coil on my saw you sent me to build and it’s working fine for now. I wouldn’t sell it with that on there but it is working.

 

[lehman live edge slab]

This saw is all original the neighbor has owned since new and it’s never had the flywheel taken off, has the 2 piece sem ignition. I’ll dig further into it tomorrow to make sure it’s not a switch but pretty certain it’s the coil. Told him his only option is a china set and he said to try one.

 

[lehman live edge slab]

Symptoms sound as if you have a one piece coil flywheel with a two coil set up. I've used a couple of the chinacom two piece kits and honestly have worked well. I should have a pic saved of the two different key positions on one and two piece flys. Let me try to find the pic. You helped me out on the 020 parts awhile ago.

I remember, how did the 020 go? Get it all up and running

 

[timg]

Up, running, and have enough for another rear handle conversion

 

[WillG]

Shop is full! Honeywell 5500 generator got a new carb, plug and oil change.
Yard Machines 8/26 is getting a service, new skid shoes, carb rebuild and a good used starter.
Murray 14.50/29 is getting an impeller mod, service, new recoil rope and grip, and a set of tire chains.
Craftsman single stage got a new carb
Exmark Commercial 30 is getting a new carb and throttle link spring.
My new to me Ariens 724E is going to be getting a service and a set of belts.
Thursday after work I'm doing a road service on a Craftsman 24" two stage snowblower.

Sent from my E6910 using Tapatalk

 

[Slumberjack]

Shop is full! Honeywell 5500 generator got a new carb, plug and oil change.
Yard Machines 8/26 is getting a service, new skid shoes, carb rebuild and a good used starter.
Murray 14.50/29 is getting an impeller mod, service, new recoil rope and grip, and a set of tire chains.
Craftsman single stage got a new carb
Exmark Commercial 30 is getting a new carb and throttle link spring.
My new to me Ariens 724E is going to be getting a service and a set of belts.
Thursday after work I'm doing a road service on a Craftsman 24" two stage snowblower.

Sent from my E6910 using Tapatalk

Job security! I love it!

 

[Moparmyway]

Whats the Murray impeller mod ?
Howz it done ?
Rubber & zip screws ?

 

[WillG]

Whats the Murray impeller mod ?
Howz it done ?
Rubber & zip screws ?

Yup makes it blow better.

Sent from my E6910 using Tapatalk

 

[WillG]

Job security! I love it!

Yup!! And that's on top of my regular 40 hour a week job!

Sent from my E6910 using Tapatalk

 

[merc_man]

I came across that videos about 4 years ago and what a differance that makes. I can blow wet slush snow and it dont clog anymore.

Sent from my SM-G950W using Tapatalk

 

[Tpagel]

Got saw in the box put together tonight
2051 p/c on a bunch of 2054 parts in the mix

Somebody stripped muffler bolt holes badly and replaced with 5/16 hardware bolts .

I will see if it runs tomorrow.

Sent from my moto x4 using Tapatalk

 

[Johnmn]

Got saw in the box put together tonight
2051 p/c on a bunch of 2054 parts in the mix

Somebody stripped muffler bolt holes badly and replaced with 5/16 hardware bolts .

I will see if it runs tomorrow.

Sent from my moto x4 using Tapatalk

Nice! You don't happen to have a spare clutch drum washer do you? The one before the e-clip, they are NLA.