What's on your bench?

[Ronie]

A 2152 I just sold the cylinder off of. I'm not sure if it's going to get the original cylinder or the new 346 one I have that was originally bought for a 346 project.

Update: I'm going to go with the original cylinder and see what I can get out of it.

.

 

[WillG]

Well I'm going to give up on the old 06 Escape. Found this nice 17 Escape Titanium 2.0 Ecoboost at my local Ford dealer. 67k miles. Photos aren't the best but she looks pretty decent. Plenty of room for saws in the back too!


Sent from my E6910 using Tapatalk

 

[Ronie]

This will be going on the 2152 above. I think someone was goofing off when it went through quality control.

 

[Agent Smith]

This will be going on the 2153 above. I think someone was goofing off when it went through quality control.

View attachment 272612 View attachment 272608

I just did one of them jugs and my xfers looked the same from the factory.

 

[tickbitintn]

Every one I've seen has looked just like that as well.

Sent from my XT1635-01 using Tapatalk

 

[Ronie]

I just did one of them jugs and my xfers looked the same from the factory.

At least they are easily fixed with them having removable transfer covers.

 

[Ronie]

Every one I've seen has looked just like that as well.

Sent from my XT1635-01 using Tapatalk

I guess they just didn't care since they were going on their cheaper saws.

 

[WillG]

Dad came and blew off the driveway. I cleared off the truck for work tomorrow.

Sent from my E6910 using Tapatalk

 

[huskihl]

Well I'm going to give up on the old 06 Escape. Found this nice 17 Escape Titanium 2.0 Ecoboost at my local Ford dealer. 67k miles. Photos aren't the best but she looks pretty decent. Plenty of room for saws in the back too!


Sent from my E6910 using Tapatalk

I have it on good authority you can fit 17 chainsaws in the back of one of those if you put a layer of cardboard between and stack 2 hi.

24 if you shove a hitch hauler box into the receiver

 

[Agent Smith]

I have it on good authority you can fit 17 chainsaws in the back of one of those if you put a layer of cardboard between and stack 2 hi.

24 if you shove a hitch hauler box into the receiver

You chainsaw Santa claus and that's your sleigh? Lol

 

[huskihl]

You chainsaw Santa claus and that's your sleigh? Lol

She was the Michigan Mafia Chariot for a few years. TN, MO, IA.....

 

[tickbitintn]

Sharpened these chains this AM, then everything in the second picture is either done or not being repaired.
The two 562's with toasted top ends are in limbo at the moment.

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

A few things got picked up during the day and there is another Husqvarna hedge trimmer on the bench that is awaiting approval.

I also trimmed the fence line with the pole trimmer to diagnose and then test after repairing.

Blew off the parking lot and back concrete pad testing a few of the blowers.

Sent from my XT1635-01 using Tapatalk

 

[Al Smith]

A blower works pretty good if the snow isn't frozen .used mine today BG 85 Stihl .

 

[Redfin]

I have it on good authority you can fit 17 chainsaws in the back of one of those if you put a layer of cardboard between and stack 2 hi.

24 if you shove a hitch hauler box into the receiver

That was the weekend that Custer and Rodney cuddled wasnt tit?

 

[Redfin]

I have it on good authority you can fit 17 chainsaws in the back of one of those if you put a layer of cardboard between and stack 2 hi.

24 if you shove a hitch hauler box into the receiver

That was the weekend that Cus, Rodney and Soysage cuddled wasnt tit?

 

[huskihl]

That was the weekend that Custer and Rodney cuddled wasnt tit?

It was one of the times they cuddled, fo sho

 

[huskihl]

That was the weekend that Custer and Rodney cuddled wasnt tit?

That was the weekend that Cus and Rodney cuddled wasnt tit?

#PaWifiStillSux

 

[Redfin]

Odd. You would think a competent internet Guy would fix that *s-word.

 

[Homelite750]

Had a husqvarna 440 and the customer’s complaint was that it would stall when the chain brake was engaged. I took the clutch cover off and found a broken clutch spring, clutch bearing melted into the worm gear, and the oil pump was trashed. Also leaked oil so new oiler hose will be installed. I’m going with dull chain as cause of failure.