2000ssm6
Super OPE Member
I need to thin out a few saws, this is my last NIB 440. Prices are firm for now, keep in mind if I have to ship one to commiefornia, it will cost me $50+ for shipping, more for the 440 as it will be insured. PM me your email for more pictures of what saw you are asking about, can't fit them all in here. The 200 has good compression and a clean piston, I have pictures also.
New in box 440, Nov. 2006 build date. I bought it from a fellow saw buddy in May 2007, it has sat in my house since and lived in a happy climate controlled environment. Comes with original box(a little rough), manual, sealed tool kit, 20" bar and green chain(these are original to the saw also but not pictured), OEM dual port muffler cover(not installed), large felling spikes and ceramic chain catcher. Bad azz 70cc saw package, $1,300 shipped to the lower 48.
SPF 1/25/19-MMWS 200, All oem 200. Ported by Randy, modded muffler that is loud. The saw runs and oils great, setup for 3/8 low pro, 7 tooth sprocket. The clutch cover catches a lot of heat off the muffler and looks rough, 100% functional though. I have the filter cover off in the picture but you can see the sticker. PHO, $550 shipped to the lower 48.
Payment; check or usps m/o. Unless you want to cover the fees for gaypal, not dealing with them. For any well known members, if you feel the saw is not as described, full return. Text would be faster but should be able to answer PMs the same day. 9 one zero, six 1 zero, 3 zero 6 nine.
The 200 will be tuned rich before shipping, be sure you know how to tune or have a dealer that will help. If you are not familiar with a ported saw, check out some threads here as they must 4 stroke out of the cut.
No trades at this time..
New in box 440, Nov. 2006 build date. I bought it from a fellow saw buddy in May 2007, it has sat in my house since and lived in a happy climate controlled environment. Comes with original box(a little rough), manual, sealed tool kit, 20" bar and green chain(these are original to the saw also but not pictured), OEM dual port muffler cover(not installed), large felling spikes and ceramic chain catcher. Bad azz 70cc saw package, $1,300 shipped to the lower 48.
SPF 1/25/19-MMWS 200, All oem 200. Ported by Randy, modded muffler that is loud. The saw runs and oils great, setup for 3/8 low pro, 7 tooth sprocket. The clutch cover catches a lot of heat off the muffler and looks rough, 100% functional though. I have the filter cover off in the picture but you can see the sticker. PHO, $550 shipped to the lower 48.
Payment; check or usps m/o. Unless you want to cover the fees for gaypal, not dealing with them. For any well known members, if you feel the saw is not as described, full return. Text would be faster but should be able to answer PMs the same day. 9 one zero, six 1 zero, 3 zero 6 nine.
The 200 will be tuned rich before shipping, be sure you know how to tune or have a dealer that will help. If you are not familiar with a ported saw, check out some threads here as they must 4 stroke out of the cut.
No trades at this time..
Attachments
Last edited:
