Neotec 660 clone

[Ronie]

I'd run it as is it might surprise you
Most of the others had excessive squish
I ran popups to get much better compression.

I've already ordered the Hyway cylinder but I'll clean the original one up and keep it for a spare.

 

[Ronie]

If its not alot of trouble could you do a few pictures of the carburetor and top av mount?

Upper AV mount.

 

[Ronie]

If its not alot of trouble could you do a few pictures of the carburetor and top av mount?

Carburetor

 

[BuckthornBonnie]

I’d eventually replace that AV mount. I’ve busted a couple AM AVs and now will not use them. The rubber pulls away from the metal in that style. I think they get some wear on ‘em and then are prone to tearing.

 

[Ronie]

I’d eventually replace that AV mount. I’ve busted a couple AM AVs and now will not use them. The rubber pulls away from the metal in that style. I think they get some wear on ‘em and then are prone to tearing.

Thanks, I'll keep an eye on it. I'll eventually replace it, fuel lines and the bar studs. First thing I'm going to replace is the cylinder and muffler bolts, they are very soft.

 

[srcarr52]

I've been looking around at pics and videos of the Farmertec G660 to see if I can tell if the Neotec 660 is made in the same factory, here's some screen shots of the Farmertec cylinder. In the video the guy starts looking at the cylinder around the 8 minute mark.

View attachment 301888 View attachment 301889 View attachment 301890 View attachment 301891

I'm waiting for the port timing numbers... if there is room to work that could be a good running cylinder.

 

[Ronie]

I'm waiting for the port timing numbers... if there is room to work that could be a good running cylinder.

I'm curious myself, I'll put them up in a bit.

 

[huskihl]

I'm waiting for the port timing numbers... if there is room to work that could be a good running cylinder.

Let’s take stabs at the opening numbers.
I’ll guess

E94
T123
I83

 

[srcarr52]

Let’s take stabs at the opening numbers.
I’ll guess

E94
T123
I83

The last Holzfforma G660 I did came out of the box as...
E96
T120
I80

 

[Czed]

I've already ordered the Hyway cylinder but I'll clean the original one up and keep it for a spare.

I'm really liking the hyway pistons
Particularly the popups
I have 7 now
Very noticeable increase in swedish saws.

 

[Woodslasher]

Thanks, I'll keep an eye on it. I'll eventually replace it, fuel lines and the bar studs. First thing I'm going to replace is the cylinder and muffler bolts, they are very soft.

I've got a pair of bar studs I pulled from a busted 048 case, if they'll fit you saw pm me your address and I'll drop them in the mail.

 

[Redfin]

Let’s take stabs at the opening numbers.
I’ll guess

E94
T123
I83

Id run those with enough comp.

 

[Ronie]

I've got a pair of bar studs I pulled from a busted 048 case, if they'll fit you saw pm me your address and I'll drop them in the mail.

Thanks, I have no idea if they will fit. Does anyone know if they will fit?

 

[Ronie]

Let’s take stabs at the opening numbers.
I’ll guess

E94
T123
I83

After I drink a cup of coffee, I'll go find out.

 

[Woodslasher]

Thanks, I have no idea if they will fit. Does anyone know if they will fit?

A look in the 048 ipl told me that the stud p/n was 0000 953 6605 and according to the interwebz that is the same p/n as the ones 066's use. They don't have the tall, tapered shoulders fyi.

 

[Lightning Performance]

A look in the 048 ipl told me that the stud p/n was 0000 953 6605 and according to the interwebz that is the same p/n as the ones 066's use. They don't have the tall, tapered shoulders fyi.

They fit.

Eating popcorn here

 

[Lightning Performance]

95/128/85

 

[Ronie]

A look in the 048 ipl told me that the stud p/n was 0000 953 6605 and according to the interwebz that is the same p/n as the ones 066's use. They don't have the tall, tapered shoulders fyi.

Cool, I'll PM you.

 

[Ronie]

Numbers for the cylinder that came with the saw, by eye.

 

[Ronie]

Muffler mod done.