SELLING Multiple saws for sale

[lehman live edge slab]

I have multiple saws I will sell if there is any interest. 4 olympyk saws 2 264’s one runs for sure and the other I got to pop on prime then the rewind rope stayed out. I used my borescope and cylinder is good. I have a 251 super that’s blown up and a 254 that’s apart and has a good cylinder I think they are pretty much the same saw looking at them. There is a homelite 330 that runs but will need some work a pair of c-5’s that aren’t the nicest but run” no pics yet need to get up to my top shelf to get them”. Also have a homelite
Ez that runs and a super ez that is missing the rewind I’m pretty certain the only thing wrong is a bad coil”has the blue coil that fails all the time” cylinder is good. And the last homelite in the group is a very nice 150 with a case. There is a jonsreds 751 that runs and oils actually pretty nice shape minus the jb welded crack on tank. From what I can find a 751 is somewhat rare and hard to get for a collection. I have a jonsreds 601 for parts or repair turns over with compression and a 49sp that’s supposed to run but haven’t checked. Next one is a nice Mac 15 with good compression but no spark I’m sure it just needs the points cleaned. And the last one for the moment is a craftsman 3.7 power sharp by roper that runs pretty nice.

 

[lehman live edge slab]

Most of these will be open to offers except the jonsereds 751 being it’s not real common I’m going to try for 250 plus shipping would be more if tank wasn’t busted still not bad saw overall.

 

[lehman live edge slab]

 

[lehman live edge slab]

All saws will be the accepted offer plus shipping except on saws with a listed price then it’s the amount plus the shipping. I’ll get pictures of the 601 tomorrow also have a 540t Husqvarna that I’ll take pictures of because I’m selling it also. The 540t runs but won’t idle on its own for longer than 10-15 seconds. It will run and cut and has good power and will idle as long as you just barely touch the throttle so this is kinda telling me it needs a new carb solenoid but from what I found need to buy complete carb. Compression was 140-145 on a press in style gauge and the saws pretty decent shape just dirty was thinking 200$ plus the shipping on it.

 

[Skisawyer]

What’s a fair offer on that homie 150 gem?

 

[Jay Hansen]

I have multiple saws I will sell if there is any interest. 4 olympyk saws 2 264’s one runs for sure and the other I got to pop on prime then the rewind rope stayed out. I used my borescope and cylinder is good. I have a 251 super that’s blown up and a 254 that’s apart and has a good cylinder I think they are pretty much the same saw looking at them. There is a homelite 330 that runs but will need some work a pair of c-5’s that aren’t the nicest but run” no pics yet need to get up to my top shelf to get them”. Also have a homelite
Ez that runs and a super ez that is missing the rewind I’m pretty certain the only thing wrong is a bad coil”has the blue coil that fails all the time” cylinder is good. And the last homelite in the group is a very nice 150 with a case. There is a jonsreds 751 that runs and oils actually pretty nice shape minus the jb welded crack on tank. From what I can find a 751 is somewhat rare and hard to get for a collection. I have a jonsreds 601 for parts or repair turns over with compression and a 49sp that’s supposed to run but haven’t checked. Next one is a nice Mac 15 with good compression but no spark I’m sure it just needs the points cleaned. And the last one for the moment is a craftsman 3.7 power sharp by roper that runs pretty nice.

Is all the metal good on the 601?

 

[lehman live edge slab]

I’ll double check but I’m sure it is in fact I’d almost bet that it would run with a bit of work, only thing off the top of my head is the wrap handle is bent a little. I’ll get a pic this evening along with the c-5’s and the t540 Husqvarna

 

[Derf]

Got interest in the Homie 150

 

[lehman live edge slab]

One guy, I messaged him and haven’t heard back.

 

[Skisawyer]

Got interest in the Homie 150

It’s all yours @Derf

 

[lehman live edge slab]

Here’s the t540 generation 1. Runs fine cuts fine but starts to stumble at idle after 10 seconds or so and dies. And like I said earlier 200$ plus shipping is fair I figured on this.

 

[lehman live edge slab]

Completely gone over 039 runs great, new oem crank seals, carb kit ,fuel line/filter and impulse line. Muffler modded and timing advance powerhead only 275 plus the ride. Handle is the only thing wrong with it cracked part way through and I tried epoxy but that failed so I put the strap on it and it’s nice and solid just not perfect looking.

 

[lehman live edge slab]

The 601 and 751 are pending.