Jon1212
Birch! Please.....
- Local time
- 8:18 AM
- User ID
- 315
- Joined
- Dec 29, 2015
- Messages
- 6,207
- Reaction score
- 35,707
- Location
- Utah, unfortunately.....
I've had this saw for a few months now, and have run around 15 tanks through it. It runs very well, but with my acquisition of a 461, I just don't see myself using this saw very much.
The Good: It runs, idles, and oils very well. It has really good compression (just under 140# @4700'). This would equate to 158# at sea level.
The Bad: AM top covers, the rear top cover screw on the recoil side seems stripped. The lower screw on the inner dawg is a larger coarse thread.
Oil seeps from around the flow adjuster. The muffler cover is slightly concave.
I would like $425/shipped to the lower 48. Shipping will be insured via FedEx.
The Good: It runs, idles, and oils very well. It has really good compression (just under 140# @4700'). This would equate to 158# at sea level.
The Bad: AM top covers, the rear top cover screw on the recoil side seems stripped. The lower screw on the inner dawg is a larger coarse thread.
Oil seeps from around the flow adjuster. The muffler cover is slightly concave.
I would like $425/shipped to the lower 48. Shipping will be insured via FedEx.