SOLD Mastermind 562XP $575 plus shipping

[rocco490]

For sale Mastermind 562XP runs strong my favorite 60cc saw. Good condition. Selling PHO $3000 OBO. It has the 46 carb but I haven't noticed bad bogging with mine the throttle response is good

edited 5/4/2017 real price 650 pho I was just giving myself a good laugh
here's the deal
I started to fall out of favor with the 562 it pissed me off the other day when it was real hot outside and gave me some crap restarting which is a known quirk with these saws. I have run it since and its been fine. then saw a 372 masterminded for sale and bought it so I just decided I am going 70cc and up with my stuff and in last year or so sold all my other sub 80cc saws except this 562 and a top handle stihl. I'm really wanting a 462 stihl when they come out IF they live up to there specs.....

pics posted later in thread I didn't clean the saw before the pictures it cleans up nice there is some wear not heavy on the front of the saw and clutch cover is scuffed but not terrible the muffler is good and clean pics don't do the saw justice I should of cleaned it but this gives an idea of the saw. it prob got 100-150 hrs on it total 50-100 since porting this is not exact but my best estimate

 

[Big1066ih]

Sounds like a bargain at $3000

 

[chipper1]

Sounds like a bargain at $3000

Do it buddy .
The prices on huskys are going up to attract more stihl buyers .

 

[Mastermind]

I think my friend Tony has made a typo. lol

 

[Dolmar Junkie]

For sale Mastermind 562XP runs strong my favorite 60cc saw. Good condition. Selling PHO $3000 OBO. It has the 46 carb but I haven't noticed bad bogging with mine the throttle response is good

Got any pics? Of this SGD , how old is the build?

 

[DSS]

Would you take $800 for the fuel cap?

 

[huskihl]

I bet the tires are brand new on this one, so I'm not even gonna inquire as to their quality

 

[rocco490]

I priced that just for kicks I would seriously want $650 for it.
The saw has flip caps on it so it may have the newer carb I will check I thought it had the 46 but heard the flip caps are newer so maybe it has newer carb I will check and post that tomorrow.

 

[rocco490]

Would you take $800 for the fuel cap?

I sure would and I would throw in the rest of the saw with it at that price too

 

[rocco490]

Got any pics? Of this SGD , how old is the build?

not sure on exactly when it was done I think about 2.5 years ago

 

[creek chub]

Got any compression readings?

 

[huskytime]

When I bought your MMWS 550xp last year it was because you had fallen in love with this 562xp. Don't sell it or I might be tempted to reunite the pair...

By the way I love the 550 for scavenging firewood up in the national forest (by permit). it wears .325 7pin 18" most of the time. I bring other saws with but I find if the 550 can't cut it, I don't really want to lift it just yesterday I got about 3 dozen rounds of 10-16" alder with it.

Seriously don't sell the 562 Tony, what are you thinking?!?!

 

[rocco490]

I just made a deal on a 372 selling to fund that

just checked its a 46 carb fellas

 

[rocco490]

i dont have a comp reading but i can assure you its good and runs strong

 

[rocco490]

I will try to post pics soon as for the saw it is mechanically good I have no compression readings but anyone who buys it if you get it and check the comp and it was low I would refund your money and pay the return shipping so thats how I would stand behind what I said about the compression being good

 

[rocco490]

 

[rocco490]

another pic

 

[rocco490]

another pic

 

[rocco490]

I didn't clean the saw before the pictures it cleans up nice there is some wear on the front of the saw and clutch cover is scuffed but not terrible. The pics don't do the saw justice I should of cleaned it but this gives an idea of the saw. It prob got 100-150 hrs on it total 50-100 since porting this is not exact but my best estimate

 

[rocco490]

When I bought your MMWS 550xp last year it was because you had fallen in love with this 562xp. Don't sell it or I might be tempted to reunite the pair...

By the way I love the 550 for scavenging firewood up in the national forest (by permit). it wears .325 7pin 18" most of the time. I bring other saws with but I find if the 550 can't cut it, I don't really want to lift it just yesterday I got about 3 dozen rounds of 10-16" alder with it.

Seriously don't sell the 562 Tony, what are you thinking?!?!

Make you a good deal on this saw if you want to bring the two back together. I started to fall out of favor with the 562 it pissed me off the other day when it was real hot outside and gave me some crap restarting which is a known quirk with these saws. I have run it since and its been fine. then saw a 372 masterminded for sale and bought it so I just decided I am going 70cc and up with my stuff and in last year or so sold all my other sub 80cc saws except this 562 and a top handle stihl. I'm really wanting a 462 stihl when they come out IF they live up to there specs.....