Huztle Crank

[stihl saws]

A taper reamer that matchs the crank would be better.
Flywheel bore is as ruff as a cobb. (as cast)[emoji19]

Most of us don't have a machine shop, full of tools. We just try to make do with what we have. That's where my advice comes from. The ordinary, average guy.

 

[67L36Driver]

I'm a big dummie![emoji849]

The outside boot collar ain't there.[emoji33]

No wonder it didn't want to start without a prime.

Must have been missing from the box.

 

[Adirondackstihl]

Dumbarse!

 

[schmidteo]

Doh... I usually forget to put the inner ring in..

 

[67L36Driver]

Dumbarse!

Too much distraction from Blondie while workin' on the kitchen island.

Yeah, that's my story and I'm stickin' to it.[emoji6]

 

[stihl saws]

I'm a big dummie![emoji849]

The outside boot collar ain't there.[emoji33]

No wonder it didn't want to start without a prime.

Must have been missing from the box.

Been there, done that.

 

[Adirondackstihl]

Too much distraction from Blondie while workin' on the kitchen island.

Yeah, that's my story and I'm stickin' to it.[emoji6]

Don't blame ya one bit

 

[67L36Driver]

361 #2 starts on choke runs cuts and idles normal.

Carb from Dave helped a lot.[emoji108]

 

[huskihl]

361 #2 starts on choke runs cuts and idles normal.

Carb from Dave helped a lot.[emoji108]

Mine needed a coil. Runs like a champ

 

[67L36Driver]

BYW:
What goes in the bottom hole in the bulkhead?
Bottom center.

I'm starting to think a plug maybe.

 

[huskihl]

BYW:
What goes in the bottom hole in the bulkhead?
Bottom center.

I'm starting to think a plug maybe.

BYW:
What goes in the bottom hole in the bulkhead?
Bottom center.

I'm starting to think a plug maybe.

Nothing. This is where the impulse hose sticks through 90% of Stihls. Possibly a universal carb box, of sorts