Bearing Removal Help - Stihl 034

[mikerudder]

Need a little help with how to remove the flywheel side bearing on a Stihl 034

Only the outer ring is left.

I am guessing I need some sort of puller to pull it out?

Any help would be appreciated, thanks!

 

[mikerudder]

 

[bigbadbob]

https://www.hemmings.com/blog/2009/03/04/a-neat-trick-for-removing-bearing-races/

 

[mikerudder]

https://www.hemmings.com/blog/2009/03/04/a-neat-trick-for-removing-bearing-races/

If only I had a welder, and knew how to weld

 

[Slacker]

Tag for answer.

 

[huskihl]

Heat the case with a propane torch in slow circles around the bearing. It'll fall out in about 3 minutes

 

[Redfin]

Or heat gun.

 

[mikerudder]

Thanks fellas.
I pulled the inner race off the crankshaft, and fitted it back together inside the case.

Heated with the heat gun, a couple taps and out she came

Now to make a list of parts needed and start the build!

 

[DrewUth]

I know you already solve it, but in the past with motorcycle cases I would set a nice piece of 2x8 on the shop floor and once it was hot I took it and smacked it down on the wood with a glove on and all the bearings would just pop right out.