SOLD 550xp

[Husky187]

Looking to sell off a buddy of mines 550xp. Overall in good condition not really run too much. Look over the photos attached and feel free to ask any questions. Selling pho or can include an 18” bar and chain, just needs to be sharpened. Look for 400 pho, or 425 with the b&c. Plus actual shipping from 18705. Thanks. Piston pics are difficult to get on this saw with an iPhone, I apologize.

 

[Husky187]

Bump. How about 400 b&c plus actual shipping from 18705?

 

[Husky187]

Bump. 375 plus actual shipping? Not too desireable are these?

 

[Backtroller]

It looks like a nice saw. However, it might be helpful to list when it was made and what model carb is on it. It looks like an older model with the non flippy caps.

 

[Husky187]

It looks like a nice saw. However, it might be helpful to list when it was made and what model carb is on it. It looks like an older model with the non flippy caps.

Where’s the carb model usually stamped on these? Quite tight under the cover.

 

[Husky187]

Here’s the serial number tag as well.

 

[Backtroller]

Opposite side of the primer. Squeeze the trigger and you can see it. Not sure what the newest is

 

[Backtroller]

I had an AT-1 which was supposed to be awful and it ran great. This picture is the AT-7B 546.

Someone with more expertise might chime in

 

[huskyboy]

At12 is newest I believe and supposedly runs best

 

[huskyboy]

My 2016 2253 has the 12 I think. Not sure exactly when the changeover was.

 

[Backtroller]

Wow Husky must make a new and improved version every month. I believe mine is a 545 - 2016

 

[huskyboy]

Wow Husky must make a new and improved version every month. I believe mine is a 545 - 2016

Im wondering if they use the same carb on 545/550? I believe the 555 has a different carb than 562.

 

[Backtroller]

I’m not sure anymore about the carbs. I’ve read they share the same carb and I’ve read they are different

 

[Husky187]

Looks like the carb is an AT-1 308. Sounds like what one member said isn’t the best. Saw runs well though.

 

[huskyboy]

If they run well leave em alone

 

[Backtroller]

Exactly. I had a 2252 with that carb and it ran awesome advanced and a muffler mod @Tpagel

 

[Husky187]

Final bump, 350 with b&c, plus actual shipping from 18705. Otherwise it becomes a boat anchor.

 

[Dub11]

Final bump, 350 with b&c, plus actual shipping from 18705. Otherwise it becomes a boat anchor.

How are you going to change it into a Stihl?

 

[angelo c]

Pm scented.

Concerned about shipping from foreign country called "Pennsylvania "
Is there a tax to enter the People's Democratic republic of New Jersey ?

 

[angelo c]

We're gonna mark this one.....on its way to Jersey.