WANTED 50cc Pro Builder

[Whitty21]

Looking for a 50cc pro builder

Ideally a 346 or carbed 261. May bo m-tronic, or with a 550xp autotune for the right price.

Let me know what you have. Bonus points if you are in Canada

 

[GCJenks204]

I’ve got an 026 that would be reasonable if you want to go that way.

 

[Whitty21]

I appreciate it. Had an 026 for a bit. Looking to try the newer versions for giggles. Thanks though

 

[Dub11]

Don't over look a Dolmar/Makita 5100, 5105

 

[Whitty21]

Don't over look a Dolmar/Makita 5100, 5105

The closest dealer to me is a 45min drive through nightmare traffic. That being said, I am not opposed

 

[Dub11]

The closest dealer to me is a 45min drive through nightmare traffic. That being said, I am not opposed

I have no idea where the closest dealer to me is lol. I order my parts from 4 states away. One thing to look out for on buying a used on is the intake boot. I bought a 510 (open port version, still a great runner) that got a top end from a torn boot and the 5105 I had ported had a torn boot but it didn't hurt anything.

 

[Nighthunter]

@cuinrearview

 

[Whitty21]

I have no idea where the closest dealer to me is lol. I order my parts from 4 states away. One thing to look out for on buying a used on is the intake boot. I bought a 510 (open port version, still a great runner) that got a top end from a torn boot and the 5105 I had ported had a torn boot but it didn't hurt anything.

Appreciate the heads up.

Buying online is a bit tricky with the currency exchange and shipping, as most online retailers are in the US from what I have seen. I appreciate the heads up on the boots

 

[Dub11]

Appreciate the heads up.

Buying online is a bit tricky with the currency exchange and shipping, as most online retailers are in the US from what I have seen. I appreciate the heads up on the boots

No problem they are a torquey saw and fly under the radar. Some people around me have never heard of them when they see me with one. Either Stihl or Poulan ya know.

 

[GCJenks204]

Appreciate the heads up.

Buying online is a bit tricky with the currency exchange and shipping, as most online retailers are in the US from what I have seen. I appreciate the heads up on the boots

If you have a Makita Tools service centre near you they can/ usually will order any parts you might need.

 

[cuinrearview]

Are you on the other site @Whitty21 ? I have five 50cc saws listed over there I'm trying to clear out, including a couple 346s

 

[Whitty21]

Are you on the other site @Whitty21 ? I have five 50cc saws listed over there I'm trying to clear out, including a couple 346s

That I am, and I did see the thread. Was kinda hoping for a bucket of parts, or a roasted jug to work on.

 

[cuinrearview]

That I am, and I did see the thread. Was kinda hoping for a bucket of parts, or a roasted jug to work on.

A man after my own heart. Good luck with your search