462 dawg help

[dustinwilt68]

Does anyone know if I buy 2 of these Dawgs if they will fit on my ms462? The stock one is a little to small for my liking, but I DNT want to give up 2" of bar length either.

 

[CLEARCUT]

Does anyone know if I buy 2 of these Dawgs if they will fit on my ms462? The stock one is a little to small for my liking, but I DNT want to give up 2" of bar length either.View attachment 228434

I don’t believe those will work.

 

[dustinwilt68]

Thank you sir, any recommendations?

 

[CLEARCUT]

Thank you sir, any recommendations?

661 dawgs work well, and I believe 064 dawgs, but I haven’t tried any 064 dawgs. I use large dawgs for falling here, perhaps you want smaller dawgs?

 

[sawmikaze]

661 dawgs work well, and I believe 064 dawgs, but I haven’t tried any 064 dawgs. I use large dawgs for falling here, perhaps you want smaller dawgs?

If I was him I'd buy the OEM 064 dawgs.

Or they make an outer that matches the stock inner.

 

[CLEARCUT]

 

[CLEARCUT]

If I was him I'd buy the OEM 064 dawgs.

Or they make an outer that matches the stock inner.

Probably a good size.

 

[dustinwilt68]

Yeah I would prefer a little smaller then the ones above

 

[sawmikaze]

Yeah I would prefer a little smaller then the ones above

Then buy the OEM outer that matches the stock inner.



Or go look at the 064 IPL and buy those.

I'd personally buy the 064 dawgs if I was you.

 

[dustinwilt68]

Thanks for the part number, I will give that a try.

 

[sawmikaze]

Thanks for the part number, I will give that a try.

No problem, it will work fine for you...plus it's around 10 bucks..if you don't like it who cares.

 

[N8TE]

Yeah I would prefer a little smaller then the ones above

Sorry I dont have a better picture or part number but these are the OEM's that came with mine.

 

[dustinwilt68]

Those look nice on there!

 

[drf256]

I asked for an outer dawg on my 462, and I got these. I can try to get you a PN off of them.

I prefer a half wrap for my use, so didn’t get a R with the bigger side cover.

They do look like 661 dawgs.



Edit: These are 661R dawgs. They are just about right Dustin, even though they look big in the pics.

 

[AlfA01]

I've used the 1122 dogs. They are what's in the 462 and 500 Ipl's as alternatives to stock.

 

[sawmikaze]

Those look nice on there!

Still way overkill for the hardwoods we have..I'm tellin you, buy the 064 set.

 

[dustinwilt68]

I am currently searching for the part number for the 064 set, those would be my preference as well. I agree most trees I cut DNT have thick bark.

 

[dustinwilt68]

1122 664 0500
1122 664 0505

This is what I can find for part numbers, anyone have a set

 

[AlfA01]

#4 and #7 save you the most bar real estate. I can get the #6 and #9 which are the west coast and R dogs pretty cheap, Dustin. Let me know if you want to go that route.

 

[Sawrain]

OE 064 dogs, plenty of bite, but don’t lose too much bar.