- Local time
- 1:12 AM
- User ID
- 4
- Joined
- Dec 3, 2015
- Messages
- 48,560
- Reaction score
- 316,221
- Location
- Banner Springs Tennessee
Might be my favorite day of the year!
@Mastermind What cylinders do you have for the hybrids?
D or hemi?
I'll offer up any thing I know. It ain't much and it's probably only worth the piece of paper its written on but what would you like to know?All of these are hemispherical.
I'll offer up any thing I know. It ain't much and it's probably only worth the piece of paper its written on but what would you like to know?
I don't. I try to not touch the cases. So far I haven't had any issues. I only work on the cylinder and the flywheel.Do y'all tap the 440 case over to 6mm when doing a hybrid?
I don't. I try to not touch the cases. So far I haven't had any issues. I only work on the cylinder and the flywheel.
This lathe work is BORING.......
I don't have a carbide yet. My boring bar has a 1/8" hss cutter going through the bar on a 45°. It works well but sometimes the plating is really thick where the wall meets the roof and I have to go over that area a few times. Carbide is on the list thoughThis lathe work is BORING.......
can I use that paper when I take the next silver eagleI'll offer up any thing I know. It ain't much and it's probably only worth the piece of paper its written on but what would you like to know?