- Local time
- 11:12 AM
- User ID
- 4
- Joined
- Dec 3, 2015
- Messages
- 47,964
- Reaction score
- 311,316
- Location
- Banner Springs Tennessee
I had a batch of these made awhile back. I've got 8 left....and a couple of guys have asked about them recently. They cost me 17.00 each, and I have to order a minimum of 30 to get them done. I use them for finishing the upper transfers, and the exhaust port roof and sides in a right angle handpiece. They are also excellent for deburring and removing casting flash.
Size of the head is .250" in diameter by about .450" I think these are 180 grit.
Let me know if you want some. We'll get it rolling.
This is the sort of finish they produce.
Size of the head is .250" in diameter by about .450" I think these are 180 grit.
Let me know if you want some. We'll get it rolling.
This is the sort of finish they produce.