Search results

My other 2100 has that flame protector cup but someone has made the holes bigger and more of them, I reckon they suck sawdust back into the cylinder if the exit is too big and free flowing.

I welded the hinge on, it was from a small wooden box as I couldn't get screws in as i didn't leave enough steel and I haven't had much luck with them staying in

This muffler I was just about to put in the scrap bin but I thought I should fix it, the front exit was ripped out and missing and it had 3 big cracks and had been sitting outside under a tree for years.

I got a Toucan to go with my 2100s I can carry 3L of fuel and 1L of bar oil on my belt

People must cut old car batteries in half

got a parts 2100 that has holes rotted right through the cace

found an airfilter cover finally, it has a crack but i can fix that

I cant find a cover for my 2nd 2100 anywhere,

The oil pump has no physical connection to the crank when the clutch is off and its tight

The manual says install the bearings in the cace, they have a tool for the clutch side bearing to use as a stop. If i don't crank the oil pump mounting screws up super tight its nice and free

Hello I put together a Husqvarna 2100cd and when i installed the clutch side main bearing I used an old oil pump as a stop to set the location of the main bearing, heated the crankcase and dropped the bearing in, but when i put the oil pump on it wouldn't turn when i tightend the screws. I think...

I just sold my homelite 2000 to someone who will appreciate it more than me, they even offered me more than my asking price

I got it to spark, was the ignition switch even tho I tested it like 10 times, end snapped off and then it started sparking, I didn't have a switch but had a 180s kill button.

How are the pullstart pawls held on to the FEMSA flywheel? Cerclips? They have been tied on with nylon on this saw, I gess the clips dont like the rpm?

Hello i have a couple of husqvarna 2100cd saws, one has no spark, it has a totally different looking flywheel and ignition system, it looks like the one on the RH side with smaller fins and red HT lead and module, Can I fit a replacement module from amazon or ebay? They look different

Got one 2100 finished, still need some spikes and a new bar, has a jungle muffler and a later chainbrake

I found this little 180s in the dirt forgottenin an old shed, I have enough parts to fix it, whats the bet I can make it run and cut down and cut up a big dead tree

The bar is not bad just needs a dress up on the end, but thanks for the information.

Took my Partner saw into the bush the other day

its funny I got offered another two, I told some other guys about them and now 3 of us have one