What's on your bench?

T.Roller · Jul 2, 2018

usmcbuckwild said:
It held over 4lbs vacuum for almost an hour with a brandy-new MityVac, so I am confident there is no airleaks. I tried the compression tester on the 026 Doc molested and it said it had 90psi (I know THAT ain’t right) so I don’t trust it.

Flywheel

460 magnum · Jul 3, 2018

My father in law was cleaning out his garage yesterday and gave me this little jewel

I think I'm more excited about the bar than the saw itself.

Stump Shot · Jul 3, 2018

460 magnum said:
My father in law was cleaning out his garage yesterday and gave me this little jewel View attachment 131138 View attachment 131139 View attachment 131140
I think I'm more excited about the bar than the saw itself.

Texas Chainsaw Massacre saw.

460 magnum · Jul 3, 2018

Stump Shot said:
Texas Chainsaw Massacre saw.

View attachment 131144 View attachment 131145

Nice!!! But size matters my bar is longer

Stump Shot · Jul 3, 2018

460 magnum said:
Nice!!! But size matters my bar is longer

I don't think I would tell him that. Lol

Tpagel · Jul 3, 2018

Got it together needs carb work

Sent from my SM-J327V using Tapatalk

Dub11 · Jul 3, 2018

Tpagel said:
Got it together needs carb work

Sent from my SM-J327V using Tapatalk

Is that a tree fiddy 7?

Tpagel · Jul 3, 2018

Yep

Dub11 said:
Is that a tree fiddy 7?

Sent from my SM-J327V using Tapatalk

ranchdadmike · Jul 3, 2018

Tpagel said:
Got it together needs carb work

Sent from my SM-J327V using Tapatalk

Nice muffler

Dub11 · Jul 3, 2018

Tpagel said:
Yep

Sent from my SM-J327V using Tapatalk

Looks good. Is that a MG2186 muff?

Tpagel · Jul 3, 2018

Oh yes it is
Mike's muffs are very nicely done.
I kept it off A 2159

Sent from my SM-J327V using Tapatalk

Onan18 · Jul 3, 2018

Tpagel said:
Got it together needs carb work

Sent from my SM-J327V using Tapatalk

New carb should be there Thursday.

drf256 · Jul 4, 2018

Husky day here. 262 jugs and a new 562 with an old tank. Gonna try my hand at one after these 262 are done.

paragonbuilder · Jul 4, 2018

Nice!

Cut4fun · Jul 4, 2018

Last one to be built from the box of parts. Finished it around 9pm last night.
Used coil came from a newer member on CR-G that I hooked owner up with.
I think that makes 10 runners in these for him now.

Tor R · Jul 4, 2018

parts for my 5xx project:

and new tools:

SOS Ridgerider · Jul 4, 2018

Had this little guy on my bench today. Makita 3410TH in need of a new piston and ring.

Pretty much everything had to come apart to get the cylinder out.

All back together and runs great! Did a quick and dirty muffler mod on it too.
Feels pretty snappy.

beaglebriar · Jul 4, 2018

SOS Ridgerider said:
Had this little guy on my bench today. Makita 3410TH in need of a new piston and ring.

View attachment 131373

Pretty much everything had to come apart to get the cylinder out.
View attachment 131374

All back together and runs great! Did a quick and dirty muffler mod on it too.
Feels pretty snappy. View attachment 131376

Nice looking saw!

PogoInTheWoods · Jul 4, 2018

MS362 M-tronic with a scored piston. Tree guy I know who takes real good care of his stuff. Vac/pres tested before tearing it down and it was tight as a drum all the way around. Good mix. Didn't lean out from an air leak or get straight gassed. No significant transfer on the cylinder, but some gouging below the exhaust port.

I did find the air filter loose and some fines in the strato intake but no scoring on the intake side of the piston, just the exhaust side. I also found this under the piston crown. I'm guessing carbonized debris ingestion from the loose air filter and the piston damage is related. I've never seen carbon buildup under a piston before.

Thoughts / opinions?

SOS Ridgerider · Jul 4, 2018

beaglebriar said:
Nice looking saw!

Thanks! It goes with the rest of my blue fleet. Lol

What's on your bench?

Mastermind Approved!

Pinnacle OPE Member

Disciple of Monkey's

Pinnacle OPE Member

Disciple of Monkey's

Pinnacle OPE Member

Saw R skeery

Pinnacle OPE Member

Pinnacle OPE Member

Saw R skeery

Pinnacle OPE Member

OPE Sponsor

Dr. Richard Cranium

Mastermind Approved!

Redneck Chainsaw Repair

Newbie

Muffler Modded Member

Attachments

The Peanut Gallery

Pinnacle OPE Member

Muffler Modded Member

Similar threads