So what did you buy today

LAWN BOY · May 14, 2024

Bill G said:
I thought you said you were not buying any saws until later this summer? Had you contcted me I could have sold you three of those running and at a better price.

You have McCullochs from when Jenn Feng owned McCulloch? Total for this one was $71 and that’s shipped, I made an offer which was accepted. Let me know what you have exactly. I know that when I do contact you later this Summer that you’re going to have lots of saws I want. Thanks.

furb · May 14, 2024

I saved an outhouse from the burn pile for the price of fuel.

Partner · May 14, 2024

furb said:
I saved an outhouse from the burn pile for the price of fuel.
View attachment 419609

Repaint and put it on ebay

Bill G · May 14, 2024

LAWN BOY said:
You have McCullochs from when Jenn Feng owned McCulloch? Total for this one was $71 and that’s shipped, I made an offer which was accepted. Let me know what you have exactly. I know that when I do contact you later this Summer that you’re going to have lots of saws I want. Thanks.

I have no idea who Jenn Feng is and I doubt anyone else does either......... Owned McCulloch yep......

that seems funny

I do not have the ability to list every one of the saws here but you sure have the ability to list what you are looking for. That makes life easier

Bill G · May 14, 2024

furb said:
I saved an outhouse from the burn pile for the price of fuel.
View attachment 419609

I bet you did not take the contents below.

LAWN BOY · May 14, 2024

Bill G said:
I have no idea who Jenn Feng is and I doubt anyone else does either......... Owned McCulloch yep...... that seems funny

I do not have the ability to list every one of the saws here but you sure have the ability to list what you are looking for. That makes life easier

They are rarer. He owned the company for not very long. Mark Heimann of this forum has lots of the saws from the Jenn Feng period.

furb · May 14, 2024

Bill G said:
I bet you did not take the contents below.

It had been partially filled with concrete junk or I would have dug around. That farm was a time capsule up until a few years ago. I figured there were bottles and trash in the pit. The house had indoor plumbing in the early eighties or before but not much was disturbed around the farm until the owner went on hospice and family cleaned up and made some stuff wheel chair accessible. It was vacant for probably 25 years until he moved from his other farm to this one when his health got bad. The other farm was probably bad enough that an home nurse would have tried to put him in a home.

Ryan Browne · May 14, 2024

furb said:
It had been partially filled with concrete junk or I would have dug around. That farm was a time capsule up until a few years ago. I figured there were bottles and trash in the pit. The house had indoor plumbing in the early eighties or before but not much was disturbed around the farm until the owner went on hospice and family cleaned up and made some stuff wheel chair accessible. It was vacant for probably 25 years until he moved from his other farm to this one when his health got bad. The other farm was probably bad enough that an home nurse would have tried to put him in a home.

The City Museum in St Louis (which is incredible, and not at all what it sounds like) has a large display of items found in outhouses. Very interesting stuff.

heimannm · May 14, 2024

Jenn Feng (Taiwan based company) owned McCulloch (North America) for about 9 years from 1999 until 2008 when Husqvarna acquired the name worldwide.

The 3505 is still a Tucson (AZ) McCulloch saw assembled in Mexico. This was during the period of employee ownership The Jenn Feng models look similar but are a vertical cylinder design rather than horizontal.

Jenn Feng saw

Mark

thedude74 · May 14, 2024

heimannm said:
Jenn Feng (Taiwan based company) owned McCulloch (North America) for about 9 years from 1999 until 2008 when Husqvarna acquired the name worldwide.

The 3505 is still a Tucson (AZ) McCulloch saw assembled in Mexico. This was during the period of employee ownership The Jenn Feng models look similar but are a vertical cylinder design rather than horizontal.

View attachment 419620

Jenn Feng saw

View attachment 419624

Mark

If not mistaken Tucson was just corporate and distribution center.... Manufacturing and assembly, at least in 91, was in Lake Havasu City Arizona....I was working there in the die cast department. Without Robert McCulloch Havasu wouldnt exist like it does today.

Bill G · May 14, 2024

I have never known anyone that wanted to collect the McCulloch branded saws of that era but heck I learn something every day

davidwyby · May 15, 2024

More 288 bits showed up today

Woodslasher · May 15, 2024

It was a few days ago, but after snapping 3 wedges on one tree coupled with never having enough in the first place I finally bought $200 worth of wedges. 4 in each size, I figure they outta last me for a couple of decades with the amount of cutting I do.

Partner · May 15, 2024

Woodslasher said:
It was a few days ago, but after snapping 3 wedges on one tree coupled with never having enough in the first place I finally bought $200 worth of wedges. 4 in each size, I figure they outta last me for a couple of decades with the amount of cutting I do.
View attachment 419640

Steel ones are more durable

I recently used them because I couldn't find plastic ones

heimannm · May 15, 2024

Indeed Tucson was the location of corporate headquarters. Most of the assembly of that era (at least for the consumer saws) was done in Hermosillo Mexico. This covers the Mini Mac series, 3200 Series, 300 Series, and 600 Series saws. I suspect there were other "professional" models as well like the PM8200 and PM4300 assembled there as well but I don't have photographic evidence to confirm it.

Mini Mac Series - several flavors

3200 Series includes the 32, 35, and 38 cc models all built on the same chassis.

300 Series - this happens to be a Silver Eagle version

Mark

heimannm · May 15, 2024

600 Series

Most of the corded electric saws (that I have) say "Made in USA", one could ascertain that some were assembled in Arizona. At least one model says "Made in Canada". Keeping in the spirit of this thread ("What did you buy...") this Silver Eagle SE250 just arrived this week.

Mark

Partner · May 15, 2024

I bought a disguise

it's an early 7000, it has a metal cylinder cover / $20

Gullet · May 15, 2024

LAWN BOY said:
They are rarer. He owned the company for not very long. Mark Heimann of this forum has lots of the saws from the Jenn Feng period.

Bill G · May 15, 2024

Partner said:
Steel ones are more durable I recently used them because I couldn't find plastic ones

They are tough on chains though.

Bill G · May 15, 2024

Ryan Browne said:
The City Museum in St Louis (which is incredible, and not at all what it sounds like) has a large display of items found in outhouses. Very interesting stuff.

Years ago I had a group of kids at the National FFA convention in Kansas City. The best part of the convention was going to industry tours and other attractions. One year we went to the Kansas City Toy Museum. One smart aleck kid saw a vintage toilet and took a poo in it. I would have liked to kill him except I did not know until we had left.

So what did you buy today

Pothole

Pinnacle OPE Member

Pinnacle OPE Member

Pinnacle OPE Member

Pinnacle OPE Member

Pothole

Pinnacle OPE Member

Pinnacle OPE Member

Here For The Long Haul!

Bonafide & Stuff !!!

Pinnacle OPE Member

Tree feller, axe handle breaker

Teh debil

Pinnacle OPE Member

Here For The Long Haul!

Here For The Long Haul!

Pinnacle OPE Member

Attachments

Here For The Long Haul!

Pinnacle OPE Member

Pinnacle OPE Member

Similar threads