Recent content by Markhv

Got the proper ring from the dealer yesterday. Got it fired up again now but I think the engine sounds different. As if it 4-strokes half the time - I have not noticed this before. Recording below. When it is working it's way through, I am just letting it chew without pushing it in any way. I...

huskihl OK then. As you might have noticed, I'm new in this game. I'll find myself a dealer who got something that fits drum I already have. Any spare parts worth spending some extra bucks on to have in stock when it gets chewed up that Saturday when the dealer is closed?

As AlfA01's pictures show, the 3/8" rim won't fit on the .325" drum. The Oiler driver has the 7 teeth that fit the .325 drum to drive it and they won't fit either. But that is just how I godt in my head... Granberg recommends 28" bar for a 60cc saw and it runs good in my world. The stuff I slab...

Here's some photos

OK. I have just had a look at the cylinder around the exhaust port and there are no vertical marks worth mentioning. There is no radial play in the clutch bearing worth mentioning. I can feel it in my hand but it is not enough to see it with the naked eye. The play I mentioned earlier is...

Sorry for posting twice. The internet connection where I live is very thin... I might have spammed the "post" button...

alfA01 I changed the sprocket to the right pitch. With no though. I will go and grab some photos of the clutch. There is some play in the clutch, 5-8 mm I would say. Dub11 What would I be looking for in the exhaust port? As a starting point, I would not think that it is a question of lacking...

I was in the woods today cutting some slabs for a shed we are building. The saw I use is a second hand Husqvarna 359 apparently with only 30 hours on the clock. It came with a 20" bar with a 3/8 chain. The saw is born with a 0.325" chain - save that info for later! Well I got myself a 28"...

I was in the woods today cutting some slabs for a shed we are building. The saw I use is a second hand Husqvarna 359 apparently with only 30 hours on the clock. It came with a 20" bar with a 3/8 chain. The saw is born with a 0.325" chain - save that info for later! Well I got myself a 28"...