ported 661 with a carb

[sawmikaze]

The 2 plates that come with max-flows work well with the stock set up as well.

 

[Redfin]

View attachment 16967

The 2 plates that come with max-flows work well with the stock set up as well.

Did you have to buy the whole set up with the cover to get that plate?

 

[sawmikaze]

Did you have to buy the whole set up with the cover to get that plate?

Its 2 plates , it doesnt work with just the one the knob goes through..you need both , call madsens.

 

[Moparmyway]

Its 2 plates , it doesnt work with just the one the knob goes through..you need both , call madsens.

I'm only using one plate on my 044, 066, and 661 saws ................. why the 2 plates Ryan ?

 

[sawmikaze]

I'm only using one plate on my 044, 066, and 661 saws ................. why the 2 plates Ryan ?

On the HD2 theres too much room behind the plate from the filter knob is the best way i can describe it...if you only use 1 plate it spins around like a prop..try it..ull see what i mean..thats on a 461.

On the max flow it doesnt seem to matter.

 

[sawmikaze]

This needs to go on first if you wanna use the plates on the HD2

Otherwise the plate wont push the filter down without the first one on..i stuck a screwdriver behind it to kinda give you an idea what i mean..and thats with the nut threaded the whole way..with just that plate it spins like a fan.

 

[sawmikaze]

You will pick up what im puttin down if you try it on a 440/460/660.

Idk on a 661.

 

[junkman]

why the orange plate on the hd2 ? cant you just put the filter nut on to hold it down ?

 

[Moparmyway]

You will pick up what im puttin down if you try it on a 440/460/660.

Idk on a 661.

I've got Max Flows on my 44's, 66's, and 661 ................. I understand you get this problem with HD2, but I would just use a washer

 

[sawmikaze]

why the orange plate on the hd2 ? cant you just put the filter nut on to hold it down ?

More area pushin the filter down around the edge isnt a bad thing in my eyes.

 

[sawmikaze]

I've got Max Flows on my 44's, 66's, and 661 ................. I suppose you get this problem with HD2, but I would just use a washer

They gave it to me in the 460 kits ive gotten..they gave it..ill use it.

 

[junkman]

Why do you guys take the plastic covers off the air filters ? Seems like if a branch hit it or a log round hit it would crush the filter easier ?

 

[sawmikaze]

Why do you guys take the plastic covers off the air filters ? Seems like if a branch hit it or a log round hit it would crush the filter easier ?

I tried the outerwear under the stock cover with an HD2 and my filter was plugged in one tank of gas.

I tried the HD2 with the outerwear under the max flow cover..it was a little better but not much.

We did a big yard poplar and an ash removal last week and i tried the plates with the HD2 and the outer wear and it was the best thing ive tried yet as far as the stock filter goes.

 

[Moparmyway]

I went 24 tanks without even blowing off that MaxFlow when I ran without a cover.
When using the cover, it gets packed with chips every tank

 

[junkman]

I tried the outerwear under the stock cover with an HD2 and my filter was plugged in one tank of gas.

I tried the HD2 with the outerwear under the max flow cover..it was a little better but not much.

We did a big yard poplar and an ash removal last week and i tried the plates with the HD2 and the outer wear and it was the best thing ive tried yet as far as the stock filter goes.
View attachment 16974

Wood must be different than what i cut normally ,i do not have that problem ,can go all day before have to tap it out ,maybe my longer bar keeps the dust away from the powerhead ?

 

[sawmikaze]

Wood must be different than what i cut normally ,i do not have that problem ,can go all day before have to tap it out ,maybe my longer bar keeps the dust away from the powerhead ?

Thats because they are bri-brids with triple port muffs !..awesome wood..awesome saws.

Buy a 362c...they are awesome too.

 

[junkman]

Thats because they are bri-brids with triple port muffs !..awesome wood..awesome saws.

Buy a 362c...they are awesome too.

That's it the triple port blows the chips away .lol

Awesome poast by the way .

 

[mdavlee]

Milling with a cover is every cut in our hardwoods. Without the cover a couple gallons use

 

[sawmikaze]

why the orange plate on the hd2 ? cant you just put the filter nut on to hold it down ?

Why not use the plates if you have them ?

I bet usin those plates seals that filter to the base better than just usin the nut.

No brainer to this Jigga-Boo.

FYI - 044s are grate.

 

[Deets066]

Why not use the plates if you have them ?

I bet usin those plates seals that filter to the base better than just usin the nut.

No brainer to this Jigga-Boo.

FYI - 044s are grate.

I never understood what the other plate was for. Thanks for solvin that life long mystery for me, your my hero