Building a 5 cube saw

[EJ mcnamara]

Building a five cube saw I'll upload some pics

 

[Deets066]

What flavor?

 

[EJ mcnamara]

Building a 281 Husqvarna 52mm and a 272 with a costom wiseco 55mm both will be 5 cube saws putting 3120 gas carbs on them for gtg

 

[Deets066]

Building a 281 Husqvarna 52mm and a 272 with a costom wiseco 55mm both will be 5 cube saws putting 3120 gas carbs on them for gtg

I’ve seen a few saws running the 3120 carbs. You don’t have any tuning issues with the non adjustable high circuit?

 

[EJ mcnamara]

Here is one pic of it

 

[EJ mcnamara]

Another

 

[Deets066]

Here is one pic of it

Looks like millenniums plating

 

[EJ mcnamara]

Yes sir I used to use max power but they went out of business

 

[Dub11]

Some more pics.

 

[EJ mcnamara]

One more

 

[EJ mcnamara]

Last one

 

[EJ mcnamara]

Some more pics. View attachment 145577 View attachment 145578

Thanks I had trouble but I got it figured out now thank you your pics are better thou

 

[Armbru84]

Looking good.

 

[Sty57]

Looks like Termites have chewed holes in that jug

 

[Deets066]

I dig it

 

[Deets066]

Why not weld the externals on before plating?
Or are you gunna JB weld them on?

 

[Mastermind]

Thanks I had trouble but I got it figured out now thank you your pics are better thou

Use "Full Size" rather than "Thumbnail" Ed.

Fine looking work there sir. I wish I had the time to get into the race saws a little more.

 

[EJ mcnamara]

I'm. Going to put brass tubes in for the head bolts then I use playdough putty jb weld around that then is sets up then I take all the putty out then it gets all the fuel it wants

 

[Deets066]

Use "Full Size" rather than "Thumbnail" Ed.

Fine looking work there sir. I wish I had the time to get into the race saws a little more.

I enjoy building a race saw over a woods port anymore. But, it takes time.

 

[EJ mcnamara]

I'm building some gtg saws too