how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Hedgerow]

Splitter broke again. Heard a pop, 4-way wouldn't go down.

View attachment 129472

Pulled the square tubing through the plate on the bottom of the splitter

View attachment 129473

View attachment 129474

View attachment 129475

Operator error...

 

[Hinerman]

Operator error...

Of course, I am hard on stuff. I need my stuff "Hinerman Proofed".

 

[srcarr52]

Of course, I am hard on stuff. I need my stuff "Hinerman Proofed".

From the looks of it, I bet you could break an anvil.

 

[moparnut88]

Of course, I am hard on stuff. I need my stuff "Hinerman Proofed".

You need to let us "Tim the tool man Taylor" that thing!

Sent from my SM-N950U using Tapatalk

 

[WKEND LUMBERJAK]

Splitter broke again. Heard a pop, 4-way wouldn't go down.

View attachment 129472

Pulled the square tubing through the plate on the bottom of the splitter

View attachment 129473

View attachment 129474

View attachment 129475

How did you do that.

 

[Workshop]

Of course, I am hard on stuff. I need my stuff "Hinerman Proofed".

My brother was hard on stuff.
He could tear up a crow bar in a sand pile.

 

[67L36Driver]

Gave the 365 clone another short run.

We used the Farmertec decomp but, measured the end to make sure it can’t fall into the cylinder should the plastic knob let go.

I think it bleeds off too much for a reliable start/run. [emoji848]

And, installed the leftover mystery screw and bumper.

 

[WKEND LUMBERJAK]

Looks nice. Bring it down we will give a run.

 

[67L36Driver]

Looks nice. Bring it down we will give a run.

Good idea.

Except I have jury duty tomorrow.

I doubt a defendant would want a geezer with a LEO son in law in the box. [emoji6]

So, my service should be short.

 

[67L36Driver]

Really cheesy rewind starter on him.

And, lots more weight than Matt’s little ripper 346.

 

[moparnut88]

The real question is how well does it run compared to a real husky? We need vids!

Really cheesy rewind starter on him.

And, lots more weight than Matt’s little ripper 346.

Sent from my SM-N950U using Tapatalk

 

[Dub11]

Good idea.

Except I have jury duty tomorrow.

I doubt a defendant would want a geezer with a LEO son in law in the box. [emoji6]

So, my service should be short.

I love jury duty

 

[Hedgerow]

Really cheesy rewind starter on him.

And, lots more weight than Matt’s little ripper 346.

Yup..

And probably less power.

Or at least similar.

 

[old cookie]

First tomatoes out of the garden today.Bacon and tomatoes sandwich for supper man I like them.

 

[67L36Driver]

Morning midlanders!

Show up at the courthouse at 9:30 we must. [emoji57]

 

[Hinerman]

How did you do that.

I had the 4-way up and a decent size round to split. The round was a little gnarly so I went to lower the 4-way. Unbeknownst to me there was a split on the table underneath the 4-way. As the 4-way went down it met the split; the force of the hydraulic piston pulling down on the 4-way and pulling up on the piston mount under the splitter, pulled the square tubing up through frame underneath the beam.

Make sense?

 

[WKEND LUMBERJAK]

I had the 4-way up and a decent size round to split. The round was a little gnarly so I went to lower the 4-way. Unbeknownst to me there was a split on the table underneath the 4-way. As the 4-way went down it met the split; the force of the hydraulic piston pulling down on the 4-way and pulling up on the piston mount under the splitter, pulled the square tubing up through frame underneath the beam.

Make sense?

Yes it does.

 

[Hinerman]

From the looks of it, I bet you could break an anvil.

LOL, Not a problem:

 

[Louie B]

A little steel and welding and you will be back in business.
At least you have all body parts intact

 

[Workshop]

Morning everybody.​