What's on your bench?

[davidwyby]

It ran much smoother today. Probably took a while to burn off all the assembly mix oil
Just need a clutch cover or flag.
I’m going to throw an old Ore 31” bar on it outfitted with some of the 43RM I have…404, .050, comp, semi chisel
Stay tuned…
Anyone want to try this chain, let me know…can make up a loop.

Pics of chain?

281 unlimited ign. If carb has a big brass thingy on the side it's governed. I think it can be deleted but don't remember details.

 

[Woodwackr]

Pics of chain?

281 unlimited ign. If carb has a big brass thingy on the side it's governed. I think it can be deleted but don't remember details.

 

[Woodslasher]

Pics of chain?

281 unlimited ign. If carb has a big brass thingy on the side it's governed. I think it can be deleted but don't remember details.

Drink can of beer, unscrew brass thingy, snippy circle of beer can smaller than brass thingy, screw brass thingy back in, drink another can of beer to celebrate.

 

[davidwyby]

View attachment 417832View attachment 417833

Looks like fun. I’ll have to figure out which bar/number of drive links.

 

[Woodwackr]

Looks like fun. I’ll have to figure out which bar/number of drive links.

I started with 95 and went down from there
Need to order more 404 presets…

 

[Canadian farm boy]

Working over a ms462 jug. Hopefully have the jug ready to go back on tomorrow

 

[heimannm]

 

[Woodwackr]

View attachment 418266

View attachment 418267

What the heck is the big yellow contraption?

 

[heimannm]

McCulloch 7-55 two man saw with a bow bar.



Mark

 

[footstep]

Found this little gem, couldn't pass it up.

 

[Squareground3691]

Found this little gem, couldn't pass it up.

Was that on eBay ,

 

[av8or3]

My Wood Boss project comes to a halt.

For now anyway. New intake boot incoming.

 

[Shane¹]

Circled back to this one been sitting a while waiting for me to work on it

 

[Czed]

Haven't seen one of these for a few year's
Red Husqvarna 353
Guy bought 3 of these and this was the last one running
Until now just needs carb,fuel lines l,primer bulb

 

[Ronie]

Haven't seen one of these for a few year's
Red Husqvarna 353View attachment 418369View attachment 418370
Guy bought 3 of these and this was the last one running
Until now just needs carb,fuel lines l,primer bulb

Nice saws, I've got one with a 346 topend.

 

[Shane¹]

My Wood Boss project comes to a halt.
View attachment 418350
For now anyway. New intake boot incoming.

Did the cylinder clean up or is it dead?

 

[av8or3]

Did the cylinder clean up or is it dead?

Dead as a hammer. I bought a used replacement set for $65.

 

[Shane¹]

Dead as a hammer. I bought a used replacement set for $65.

Bummer

 

[EFSM]

Not exactly what's on my regular work bench...
Yesterday I took a break from teaching school and repairing 2-strokes to make some graduation gifts for a few of my students.
The 3 bolt action pens on the left are made of Bethlehem Olivewood and the one on the right from aromatic cedar.

 

[davidwyby]

Fatter rope in my red huskies so the starters don’t splode

I have plenty xtry if anyone needs some…

2175 got the special color coordinated black n red rope think it might have been stihl?

Learned on the 2188…gonna try to make a threaded post in the middle to repair that starter. Then need a pulley for it.

I think one of my 346 starters needs the same treatment…binds sometimes.