Super wiz 80

[Grimmreaper]

This was a package deal when I bought the homelite 1130g.
This does run yet,it fires so there is life to be had!

 

[bagpipingtrucker]

Wow, that's a hell of a package deal!
I was able to finally get a really nice Homelite Super 1050 Automatic, I have a nice collection of Homelites and the bigger saws are on my platter.

Homelite collector in training [emoji879]

 

[Lee H]

Very nice and both saw look to be in nice shape. Both will make great runners. The 80 is the
best of the wiz or super wiz saws and carry a higher price tag than it's sisters and brothers.

 

[Grimmreaper]

Very nice and both saw look to be in nice shape. Both will make great runners. The 80 is the
best of the wiz or super wiz saws and carry a higher price tag than it's sisters and brothers.

What kinda price? Or value ?

 

[Grimmreaper]

I needed a larger saw to cut a large maple that's down in the yard but can't afford the new price tag of a newer 90cc saw!
SO I'M GOING OLD SCHOOL

 

[bagpipingtrucker]

The 1130 is 100cc's and a gear drive that will work great.

Homelite collector in training [emoji879]

 

[bagpipingtrucker]

The saws a beast.

 

[Grimmreaper]

The saws a beast.

Your talking to a newbie at these old school saws! Converting to .404 is only a sprocket change right?

 

[bagpipingtrucker]

A sprocket change, the gauge of the bar (drive link thickness) and the length of chain needed. Frawley's saw shop can do the conversion from 1/2" to .404.


Homelite collector in training [emoji879]

 

[Grimmreaper]

A sprocket change, the gauge of the bar (drive link thickness) and the length of chain needed. Frawley's saw shop can do the conversion from 1/2" to .404.


Homelite collector in training [emoji879]

Thanks for the info ,I'll check it out!
Sprocket,new bar and chain !
I'm afraid to hear what the bill would be?
36" bars and chains to fit could be pricey!

 

[bagpipingtrucker]

You shouldn't need a new bar if its not damaged just a loop of chain and the sprocket.

Homelite collector in training [emoji879]

 

[Grimmreaper]

You shouldn't need a new bar if its not damaged just a loop of chain and the sprocket.

Homelite collector in training [emoji879]

I made the call and left my number... should hear something tomorrow!

 

[Maintenance Chief]

I made the call and left my number... should hear something tomorrow!

I converted a D009 husqvarna mount Oregon bar to fit my super 1050A , 36" sprocket nose is a Hell of alot cheaper than nos.

 

[Grimmreaper]

I converted a D009 husqvarna mount Oregon bar to fit my super 1050A , 36" sprocket nose is a Hell of alot cheaper than nos.View attachment 239094

Alot lighter too !
What was the whole set up cost?(conversion and bar and chain)

 

[Mastermind]

Good thread here. It's cool to see one of Brad's videos. I texted him a few weeks ago, he's moved onto hot rod LS motors.