SOLD Stihl MS200, rear handle

[2000ssm6]

All oem 200 that is clean, PHO. Stock with a muff mod(screen removed). The saw runs and oils great, setup for 3/8 low pro. While I could not get any piston/cylinder pics, looking from the spark plug hole, all looks well. Taking the mufflers off these isn't fun but could try to get some p&c pics for anyone VERY serious. These are some bad arse little limbing saws, great for young or older folks. $475 shipped to the lower 48, can do f&f pp, check or usps m/0. For any well known members, if you feel the saw is not as described, full return. Text would be faster but should be able to answer PMs the same day. 9 one zero, six 1 zero, 3 zero 6 nine.

It will be tuned rich before shipping, be sure you know how to tune or have a dealer that will help.

 

[2000ssm6]

More pics

 

[chipper1]

Back up, looking for a 461

Those little 200's are fun saws.
So are 461's .
GLWS/T

 

[2000ssm6]

Thanks Chipper, I have 2 more, one with extra bananaers. Mean little saws.

 

[sgrizz]

They are indeed mean running saws . I have a stock one I got off of lowvolt and wont sell it . I would like to get it ported sometime .

 

[Lightning Performance]

Where was this before the 241MTronTM saw was available?

I looked for one of these for years and years and years and years...

The TM241 would be it's only straight up competition.

Nice saw

 

[chipper1]

The TM241 would be it's only straight up competition.

What about the ms201?

 

[Lightning Performance]

What about the ms201?

What about it?
Feels like mush in my hand. Modded the first edition, sold it. Ran the undated kit on a fairly new one. No Thanks. Ran a ported one. Same as my my stock 200's with the screen out.
Still feels like mush plus they suck in large hardwoods imo which don't mean chit.

Here comes another nasty Noreaster.
Someone sharp and wanting to be "on it" will buy this saw.
Mean little saw with chisel chain and the spark screen removed.

 

[chipper1]

What about it?
Feels like mush in my hand. Modded the first edition, sold it. Ran the undated kit on a fairly new one. No Thanks. Ran a ported one. Same as my my stock 200's with the screen out.
Still feels like mush plus they suck in large hardwoods imo which don't mean chit.

Here comes another nasty Noreaster.
Someone sharp and wanting to be "on it" will buy this saw.
Mean little saw with chisel chain and the spark screen removed.

Just responding to you saying the 241 is the only competition.
I've had them both, the 200 is great because if there's a problem not need to visit the dealer.
I don't think the 241 is a good comparison because it's way heavier.

 

[Lightning Performance]

Just responding to you saying the 241 is the only competition.
I've had them both, the 200 is great because if there's a problem not need to visit the dealer.
I don't think the 241 is a good comparison because it's way heavier.

Ill take weight and torque with better AV but not mushy. Every 201T saw I see has bagged AV springs. The 200 rarely needs much love just a little cleaning some tuning and off they go most times.
IMO 200 241 are better than 201. AV is the most noticeable to me. 201 feels like slop in my hand. Comparable to a bagged out 192T, eww.

 

[Lightning Performance]

We all know the 200s you dog in and work with it. The lesser saws you work around the wood and wear out your shoulder.

 

[2000ssm6]

back up

 

[Jorge Ortega]

Hi, is the saw still for sale?

 

[Dub11]

Hi, is the saw still for sale?

Welcome to the OPE