ELECT6845
Pinnacle OPE Member
- Local time
- 2:08 AM
- User ID
- 303
- Joined
- Dec 28, 2015
- Messages
- 337
- Reaction score
- 1,204
- Location
- INDIANA
This saw had some modifications from D&D saw shop in Salem Indiana. This one has the K&N filter set up with the choke removed from the carb and a primer bulb installed. Compression is getting a little low at 145 and there is a scratch on the piston (see pics). Clutch cover has a crack and the decomp hole has been sealed off.
It runs great and I do believe it was ran at 32:1 on 100LL AV fuel. I say this because that is the fuel of choice for D&D.
It was a logger saw so it probably has a few missing screws, bolts, etc.
500.00 plus shipping PHO
It runs great and I do believe it was ran at 32:1 on 100LL AV fuel. I say this because that is the fuel of choice for D&D.
It was a logger saw so it probably has a few missing screws, bolts, etc.
500.00 plus shipping PHO
