brushwacker
Super OPE Member
- Local time
- 1:19 AM
- User ID
- 2485
- Joined
- Jan 18, 2017
- Messages
- 257
- Reaction score
- 353
- Location
- NW IN, USA
1 power head about 90% complete. Clutch side was toasted and melted the plastics, parts missing: clutch, hub, etc.. Most the remainder of this saw looks very good for its age. It ran and sounded good when i took it on a trade couple years ago but at the moment is only running on prime . Cylinder and piston look good , it easily holds its weight for compression holding the starter rope. I opened up the muffler significantly.
# 2 is what you see. Piston is scuffed. Turns over, missing many parts. Rear handle has a crack, but could be mended and used. Looks like u could use the tank housing and oil pump on repairing the other. It's top cover and air filter cover look a little different then the other.
Both these together I would sell for $175. FIRM + SHIPPING IN USA.
Will consider parts lots $50 or more reasonable offers. Lowball offers may be ignored. I have a significant amount
of money and time involved.
# 2 is what you see. Piston is scuffed. Turns over, missing many parts. Rear handle has a crack, but could be mended and used. Looks like u could use the tank housing and oil pump on repairing the other. It's top cover and air filter cover look a little different then the other.
Both these together I would sell for $175. FIRM + SHIPPING IN USA.
Will consider parts lots $50 or more reasonable offers. Lowball offers may be ignored. I have a significant amount
of money and time involved.
