SOLD Stihl Cylinders, Pistons, Crankcases, Plastics, ms362 parts & more.

[northwest saws]

Updated 1/29/22 Still have the 362 M-tronic crankcases, ms461 piston, 025 plastics, 290/311 top cover, 031 starter housing and the 048 crankcase. Prices don't include shipping. Thanks!

MS362 cylinder & piston set Sold
MS461 Piston(No rings) Asking $30
025 Cylinder Sold

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Ms362 crankcase non-mtronic good condition and cleaned up. Good crank and bearings. 2012 manufacture date with serial 289894395. Sold
Ms362C-M flywheel side case half clean and in great shape. Asking $30
048 crankcase clean and in good shape. Good crank and bearings. Has thread insert by front right of case. Make offer


Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Ms362 muffler good shape Asking $15
025 Top/handle cover $10
025 filter cover $5
030/031 NOS rewind housing $5
025 handlebar $10
056/045 handlebar $10
MS460 Handlebar Sold

Sent from my SM-N970U using Tapatalk

 

[Homemade]

Do you have a break flag for a 362. Mine works, just the plastic flag has damage.


Sent from my iPhone using Tapatalk

 

[northwest saws]

I'll check when I get home, I think I have one. If not, I know a guy.

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

I was going to build a new old stock 044 with these but I no longer have interest in that and have bills to pay. All of it is sold

NOS Early 044 Crankcase Sold
NOS Early 044 Filter base Sold
NOS Early 044 Filter cover Sold
NOS Early 044 switch shaft Sold
Very nice 044 10mm crank Sold
Near-minty 044 Early Mahle Cylinder Sold
Used 044 Starter Sold

 

[BangBang77]

I'll take the 044 Mahle cylinder, the 044 red switch shaft, and the 044 10mm crank.

I will send you a PM tomorrow morning with PayPal and shipping info.

 

[northwest saws]

Do you have a break flag for a 362. Mine works, just the plastic flag has damage.


Sent from my iPhone using Tapatalk

Sent you a pm.

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

(2) MS461 top covers Sold
044 filter cover $15
(5) 064 filter cover(old metal style) $5 each

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Ms362 air guide shroud part # 1140 080 0900 $10
Ms362 carb bracket part # 1140 120 0901 $5
Ms362 manifold part # 1140 140 2500 $10

Sent from my SM-N970U using Tapatalk

 

[BangBang77]

Ryan,

I will take the 044 top cover and filter base. Shoot me a PM with shipping cost to me and I will PayPal you. Same address as the other parts.

Thanks,
Jared

 

[BangBang77]

What other 044 parts you have laying around?

 

[northwest saws]

What other 044 parts you have laying around?

I definitely have several small parts lying around. Clutches, maybe a few drums, sprockets, bearings, oil pumps, brake parts, a couple brake handles, some 3/4 wrap handle elbows. Pretty sure I have a couple more filter bases, crankcases and possibly a couple more 044 cylinders. I may have an 046 cylinder hanging around too. I stock 3/8" full skip oregon chain too if anyone needs a loop of chain or two. Pretty sure ive got more bars out there too. Theres carb parts and intakes and maybe some clutch covers too. I could keep going but i'd rather not create a huge wall of text. PM incoming on the 044 base and top cover.

 

[northwest saws]

All parts have been spoken for off this 064 carcass. Thanks to all who were interested. I can most likely rustle up 1 or two more 064 tanks, maybe even an 066 tank so message me if you're in need.
Sent from my SM-N970U using Tapatalk

 

[AlfA01]

Found an 064 carcass with some good parts. If there's enough interest I can part it out. Has a good wrap handle bar, tank, starter, ignition components, clutch components, crankcase and maybe a good crank.

Sent from my SM-N970U using Tapatalk

PM scent on the 064 carcass.

 

[DND 9000]

Ms362 air guide shroud $15
Ms362 carb bracket $10
Ms362 manifold $15

Sent from my SM-N970U using Tapatalk

You should give more specific information for these parts if you want to sell these so that the buyer knows if it`s the right one for him. There are many versions of these (older, newer) and most don`t interchange. Which exact part no. from which exact saw, what`s the serial no. they came from etc...

 

[northwest saws]

You should give more specific information for these parts if you want to sell these so that the buyer knows if it`s the right one for him. There are many versions of these (older, newer) and most don`t interchange. Which exact part no. from which exact saw, what`s the serial no. they came from etc...

A good observation, sorry if there's been any confusion with this stuff folks. I forgot how many variants of these parts are out there. To clarify, these parts came off a 2012 standard ms362 with serial 289894395. It was non m-tronic with the adjustable carb. I will include part numbers with the pics and prices. Also I highly encourage folks to ask questions if ya got em. I want to make sure people are getting what they need.

Sent from my SM-N970U using Tapatalk

 

[Maintenance Chief]

Do you have any plastic 028 fuel tanks?

 

[northwest saws]

Do you have any plastic 028 fuel tanks?

I'm pretty sure I got rid of the last 028 parts but I will do some digging. If I don't have it I know a fella that probably does.

Sent from my SM-N970U using Tapatalk

 

[Maintenance Chief]

I'm pretty sure I got rid of the last 028 parts but I will do some digging. If I don't have it I know a fella that probably does.

Sent from my SM-N970U using Tapatalk

Thanks ,it doesn't have to be pretty. Just not broken.