WANTED Stihl 10mm 044 case wanted

[Scotty Overkill]

Hey peeps, looking for a 10mm 044 case. Namely the PTO side, I have a good flywheel side. I'll buy a whole case but if you just have a decent PTO side that'll work too. Not interested in any 12mm cases.....I've got a few of those.

I've gathered up enough parts on my bench (including an "iffy" slant fin cylinder thet imma throw the dice on) to build another 10mm/12mm combo so I may as well do it before I sweep all these parts into a box and tuck em away! Any leads or help is greatly appreciated.....

 

[DavidP71801]

I have a set of 10mm cases that has a bad crank. They look pretty good on the outside no cracks or anything broken I’ll split them tonight or tomorrow inspect the inside, clean them up and send pics

 

[DavidP71801]

sent you a PM with Pics of the set I have

 

[old guy]

Whats the difference between 10 & 12 mil. cases?

 

[Scotty Overkill]

Whats the difference between 10 & 12 mil. cases?

Quite a few, the bottom clearances (volume) are tighter in the 10mm case, pretty sure deck height is slightly different, early 10mm cases also had 4mm top cover and recoil screws which changed over to 5mm with the 12mm saws. This picture shoes some quick references when looking from the outside of the case at a glance.....

 

[jacob j.]

Quite a few, the bottom clearances (volume) are tighter in the 10mm case, pretty sure deck height is slightly different, early 10mm cases also had 4mm top cover and recoil screws which changed over to 5mm with the 12mm saws. This picture shoes some quick references when looking from the outside of the case at a glance.....

View attachment 372589

The second hybrid I built, I used a NOS set of 10mm wrist pin 044 case halves. That one turned out to be a great runner. I had to do some clearance work with the crank and a few spots in the case. I fell timber with it for a few months and sold it. That's one I'd like to have back - a great machine.

 

[Scotty Overkill]

The second hybrid I built, I used a NOS set of 10mm wrist pin 044 case halvess. That turned out to be a great runner. I had to do some clearance work with the crank and a few spots in the case. I fell timber with it for a few months and sold it. That's one I'd like to have back - a great machine.

The one I just built is probably my favorite saw I've ever owned. I'll own it til I die.....

10mm case, 12mm crank and piston, slant fin cylinder, .018 squish, worked over the transfers, DP muffler, home-built tool steel spikes. It's a beast......

 

[old guy]

Yeah, I had seen that info., not being a stihl guy it just didn't stick with me, I do have a 12m/m 044 slant fin with the D cyl.

 

[Scotty Overkill]

Yeah, I had seen that info., not being a stihl guy it just didn't stick with me, I do have a 12m/m 044 slant fin with the D cyl.

Wanna sell it??

 

[old guy]

Nah, I gotta keep a couple of stihls around to avoid snobbery with the nieghbors.

 

[Johnmn]

Nah, I gotta keep a couple of stihls around to avoid snobbery with the nieghbors.

Plus I think that saw could just come back here if that selling day ever came.

 

[old guy]

Plus I think that saw could just come back here if that selling day ever came.

Hey John, long time no hear from ya. Ya got enough snow up there?

 

[Johnmn]

Hey John, long time no hear from ya. Ya got enough snow up there?

Haha just about, to say I'm tired of winter would be an understatement!

 

[old guy]

Haha just about, to say I'm tired of winter would be an understatement!

Yeah, I'm so tired of the ice we have here from the rain & freezing.
My nieghbor burned all his wood 10-12 cord, as we speak he just dug his way to the pile I have here with his bobcat. Next week sposed to be in the 60's

 

[usedsmallenginedepot]

I’ve got 3 of the 10mm cases with good cranks, going to be listing them on my eBay store over the next couple days.

 

[usedsmallenginedepot]

Also have 6-8 slant fin cylinders that will also be listed.

 

[Scotty Overkill]

Also have 6-8 slant fin cylinders that will also be listed.

I'd be interested in one or two....

 

[timg]

Also have 6-8 slant fin cylinders that will also be listed.

Hello sir, It would go along way with myself and others on here to offer @Scotty Overkill the discount you previously talked about. I'm sure it would be to your advantage in the future. Thx. timg

 

[usedsmallenginedepot]

Yup I’m going to do 10 percent off and free shipping for any OPE members.

 

[jacob j.]

Yup I’m going to do 10 percent off and free shipping for any OPE members.

That's excellent because Scotty is a guy we really like. He ain't much to look at but we like him anyway.