tickbitintn
Pinnacle OPE Member
- Local time
- 6:19 AM
- User ID
- 464
- Joined
- Jan 9, 2016
- Messages
- 1,897
- Reaction score
- 8,016
- Location
- middle tn
Need to move a few saws.
- Dolmar 5105 (easy start) all stock except muffler has been de-kittied
-Husq L65 everything worked last time i ran it about 6 months ago
-Husq 455 rancher only a couple tanks thru after total rebuild. Gaskets, seals, rings, carb replaced...
-Husq 137 been sitting probably has fuel issues...
-Echo CS3000 top handle new carb and tuned about a month ago
Have a couple "project" saws available also
-Husq 55 rancher- really clean has AM closed port 46mm p/c
base and squish cut reassembled and never fueled or ran
no porting to cyl
-Husq 350- really clean AM "white box" 346 cyl -base cut to square to bore
squish .0165 with no gasket. never fueled or ran
-Stihl 028s- fairly clean but faded had full rebuild (has AM piston) tank or so thru it...
Can post pictures and give more info on any, just ask if interested.
I know none of these are NOS unicorns!! LOL
- Dolmar 5105 (easy start) all stock except muffler has been de-kittied
-Husq L65 everything worked last time i ran it about 6 months ago
-Husq 455 rancher only a couple tanks thru after total rebuild. Gaskets, seals, rings, carb replaced...
-Husq 137 been sitting probably has fuel issues...
-Echo CS3000 top handle new carb and tuned about a month ago
Have a couple "project" saws available also
-Husq 55 rancher- really clean has AM closed port 46mm p/c
base and squish cut reassembled and never fueled or ran
no porting to cyl
-Husq 350- really clean AM "white box" 346 cyl -base cut to square to bore
squish .0165 with no gasket. never fueled or ran
-Stihl 028s- fairly clean but faded had full rebuild (has AM piston) tank or so thru it...
Can post pictures and give more info on any, just ask if interested.
I know none of these are NOS unicorns!! LOL