SELLING Selling all my saws Stihl and Husky

[Pugsley555]

Getting rid of my chainsaw stash I've been piling up they were all builders and I kept on adding new parts to each one so I came up with quite a few and now I came into a situation where I need to move quick and I need to get rid of some of the saws to be able to do so. I will have a list of them by tomorrow night with pictures off the top of my head I know I have about 6 Husqvarna 50s that are overall at least 90% complete to ms260 pro that have new Pistons one New old stock cylinder and one regular cylinder and pretty decent condition I have about 4 262's 2-3 257 1 254 all of which have new Pistons and some other newer parts but are all OEM except for the Pistons some meteor some golf. I've got a complete Husqvarna 353 just need a top in for it. I have a Stihl ms360 pro has a little mag damage on the bottom rails on the sides of the are on the sides of where the tank handle goes but nothing that Hertz operation of this all just cosmetic but it's been powder coated and mostly all new OEM parts just got to get a sprocket for it have a steal 11 AV just needs carb rebuild kit possibly new fuel lines a Stihl 0.32 AV needs a coil maybe yes did another small or two that I'm not thinking of now I have to complete Husqvarna 44s when I tore them down Lauren had 160 PSI compression the other one was too rough to turn to tell and I also have an old-school Husqvarna top-handle saw that I couldn't get a reading on as far as what make but as I said I will tomorrow also have eight Tanaka 262 ours and to 62 ells all they need is maybe maybe $50 worth of parts that I've checked on ereplacementparts and every one of them you can get what you need for a 50 box and those gas powered drills have great pistons and cylinders in them will have pictures posted tomorrow

 

[drf256]

PM sent

 

[ammoaddict]

Interested, waiting for pictures

Sent from my Moto G (4) using Tapatalk

 

[RI Chevy]

PM sent

Quick on the draw!

 

[Fruecrue]

Muh brain hurts.

 

[Jughead]

May be interested in the Drills

 

[cuinrearview]

Any Jonsereds? Or 394/395 projects?

 

[Woodrow]

PM sent

 

[Pugsley555]

Here is the 351 it's got a 350 starter assembly cover on it AR sticker rather that one was prettier than the original so I'll put that on there but it's complete you might be able to work that cylinder out but you'll definitely need a piston for it everything else is present and gets plenty of fire and the crank turns freely and I can include a nice OEM bar that was on it. Either a 16 or 18 but it's actually in pretty good shape the bar and the saw is actually an excellent shape yes it's going to need that cylinder and probably carb rebuild kit like every saw you pick up but I was figuring 200 plus the shipping PayPal friends and family otherwise you pay the 3% for the charge

 

[Pugsley555]

 

[Pugsley555]

sorry about all the random pictures my phone is acting crazy I believe it's from welding and some of the Sparks busted it up the glass screen that is

 

[trooney]

Quick on the draw!

Yeah, either the 260 or the 262's....

 

[Pootus]

May be interested in the Drills

Sorry about the wait phone broke therefore account, and password problems. Here are some of my gas powered drills all have plenty of compression most only need gas tank, air filter cover, intake, carb on one or two and I have most of the recoils.

 

[Pootus]

A few more. Sorry guys most of my saws are mid range. 1,254. 1,261 converted to 262.
4or5 257's with conversion in mind but still have OEM 257 p&c in excellent condition and 262 p&c and other parts galore except top covers. A ms660 a ms360 pro a builder 026 pro, a 357 that needs TLC 4 or 5 50/51 that may need cylinder kits.

 

[Pootus]

Alright guys so here are quite a few of my saws I have the Stihl ms660 which I know none of you will anyways I have the ms360 that I built from the ground up the only thing that is not stock or OEM as the plastics the top cover an air filter cover and it has a meteor cylinder kit,
I can or I do still have the original top cover that I can include with it. It has a Oregon hard-nose bar and a brand new chain on it. I have a complete and running Husqvarna 254 the 300th anniversary are the 300 addition or whatever that 300 thang is I'm sure that you guys know. I'm not sure if that means like it's an XP model like with the specials on the 42 but it is a close 4 and it does have they adjustable oil pump so maybe it is an XP in either case if it's not the XP starter assembly I have on there is just one I came across. I did however install a walbro HD 120 so maybe that would help I'd be more of a XP along with a Husqvarna 357xp sprocket. I have an old Stihl 0.32 AV chainsaw if anyone's interested I could point out the little damages here and there. Nothing that would affect the saw it all has new AV mounts the ignition the little module went out so I had to add a different type of module or I forget the name of them it makes it where you don't have to have the points it has a 20 inch bar Stihl 3/8 and a pretty good chain they safety brake does work and overall it's in pretty good shape. As far as the 257th and the 262s I have quite a few components for both I know I have two or three 257 cylinders all in excellent condition and two 257 pistons which are also in excellent condition. I have three 262 cylinders one is Ks cylinder and the other two are the 262 mahle cylinders with the decomp and I have one new golf piston kit add another golf piston kit that I ran for maybe an hour and the Pistons and cylinders are in excellent condition one or two of them have been ported but not to the point of affecting the timing as well as I believe one of the 257 cylinders has then forwarded without affecting the timing but all of them have cylinders that are and hardly any way if any damage and for the 262s I have caber rings. I have one magnesium sprocket cover another plastic one and I'm pretty sure I have another one laying around somewhere I have all the braking hardware top cover for the 257 I believe one top cover are to maybe for the 262s I have starter assembly for all of them carrying handles I have actually a powder-coated and Husqvarna Orange two of the crank cases I have new bearing seals clutches sprockets oil pumps la fleur's HDA 122 144 carburetors plenty of coilsand about everything else you need to put them together I also have quite a few of Tanaka 262 l262 are and other gas powered drills that range from 350 all the way up to $1,200 all of them have excellent compression nothing wrong with pistons or cylinders some may only need a carburetor others may need all the way up to a top cover gas tank carburetor air filter assembly which I've priced and the most you'll pay is 60 box so here are some pictures PM me if you're interested.

 

[Pootus]

 

[Pootus]

 

[Pootus]

Forgot that mentioned 51 +55s all of them turn over but I'm not sure if the piston and cylinders are good but the bottom end of them seem to be in really good condition just make me an offer

 

[Pootus]

If interested in anything make me an offer I'm trying to get rid of as much as I can

 

[Pootus]

More