SOLD Projects: 550XP, 266SE, Solo 656

[GoBigBlue1984]

I’ve got customers saws piling up. Some to build, some to port, some both. But I’ve got my own projects scattered everywhere (cuz I’m a parts hoarder) and there’s no sense in having so many projects. So I’m going to “try” to get rid of some stuff.
550xp. I haven’t been through this saw other than I pulled the muffler when the previous owner told me it was hard starting and Basically wouldn’t run. Compression seems low. Some scuffing on the exhaust side. Would probably clean up fine.
$160 plus shipping PHO


I’ve also got a brand new 550xp OEM top end I’ll sell with this saw or separate for $60.

 

[GoBigBlue1984]

Next up is a 266se with full wrap. Brake flag looks to have been bent a little. Wrap looks the same. Both could be straightened though I believe.
I know saw needs fuel line (see picture) and kill switch will need attention. Compression feels Good. Piston looks good. Overall a clean saw.
$150 plus shipping

 

[GoBigBlue1984]

 

[kkemp]

I'm interested in the 550 xp

 

[p61 western]

@Czed that 266 has your name all over it.

 

[GoBigBlue1984]

Last is a solo 656 that I picked up a while ago. All I knew was that it didn’t run and was complete minus the muffler and one top cover clip. I bought a new muffler for it from Kimbers in Syracuse, New York. Split the muffler and opened up the cage/baffle as well as the stock outlet. Advanced timing 6 degrees. Buttoned everything up and it’s not getting spark. Bummer. I put it on the shelf in hopes to get a new coil one day but I’ve lost interest. Clean, neat little saw...
I have no idea what it’s worth as it sits. the only other 656’s I’ve ever even seen were Reilly’s.
Is it worth $160 plus shipping?????

 

[GoBigBlue1984]

 

[GoBigBlue1984]

 

[jacob j.]

Brett - I'll take that 656 action...

 

[GoBigBlue1984]

It’s yours JJ. I’ve got some other stuff to send you.

 

[jacob j.]

It’s yours JJ. I’ve got some other stuff to send you.

Why don't you hold off until I figure out what I got for 346/353. I'm pretty sure I have a new OEM NE top end along with some other goodies.

 

[GoBigBlue1984]

Why don't you hold off until I figure out what I got for 346/353. I'm pretty sure I have a new OEM NE top end along with some other goodies.

I’ll go ahead and get it boxed up and this other stuff shipped out. I want it all outta my way lol. You and I do enough swapping, we’ll figure details out at a later date.

 

[GoBigBlue1984]

Solo 656 is Sold

550xp is pending

 

[jacob j.]

That 266 is a sweet ride for someone.

 

[Cat 525]

Not lasting long!

 

[Deets066]

Nice lookin 656, id like to hear a little feedback on how they run

 

[GoBigBlue1984]

Carl has built some too. I texted him earlier but haven’t heard back yet.

Here’s one of John’s

 

[Deets066]

Carl has built some too. I texted him earlier but haven’t heard back yet.

Here’s one of John’s

Nice!

 

[Armbru84]

Nice!

Nice lookin 656, id like to hear a little feedback on how they run

I knew I should have dropped mine off with the 694...seem to run well.

 

[Dub11]

Last is a solo 656 that I picked up a while ago. All I knew was that it didn’t run and was complete minus the muffler and one top cover clip. I bought a new muffler for it from Kimbers in Syracuse, New York. Split the muffler and opened up the cage/baffle as well as the stock outlet. Advanced timing 6 degrees. Buttoned everything up and it’s not getting spark. Bummer. I put it on the shelf in hopes to get a new coil one day but I’ve lost interest. Clean, neat little saw...
I have no idea what it’s worth as it sits. the only other 656’s I’ve ever even seen were Reilly’s.
Is it worth $160 plus shipping?????
View attachment 152430 View attachment 152431 View attachment 152432 View attachment 152433

Is Kimbers a saw shop? Do they still have Solo stuff lying around?