Armbru84
Just trying to get by
- Local time
- 11:42 AM
- User ID
- 1549
- Joined
- Jul 14, 2016
- Messages
- 1,851
- Reaction score
- 10,899
- Location
- Michigan
Have a very nice 6400 with a 7910 top end on it. Woods port that runs very well. Dave ran it last year in the 7910 build off and it was 4th out of 10 in that class...solid saw all around.
saw has a 272 unlimited coil, gutted muffler, and the heated handles etc. all in all the saw is in very nice shape and everything works as it should. Also has a 372 carb I believe on it. I did trim the rubber chip deflector to clear a larger sprocket. Looking for 800 pho and the ride. Have bars and chains also if needed. I have normally would use a 24 on it but it can handle longer. It’s also pretty quick in a cant and has won some races there. All in all I would say I have 5 tanks on it since new, just to many saws. Any questions just let me know.
saw has a 272 unlimited coil, gutted muffler, and the heated handles etc. all in all the saw is in very nice shape and everything works as it should. Also has a 372 carb I believe on it. I did trim the rubber chip deflector to clear a larger sprocket. Looking for 800 pho and the ride. Have bars and chains also if needed. I have normally would use a 24 on it but it can handle longer. It’s also pretty quick in a cant and has won some races there. All in all I would say I have 5 tanks on it since new, just to many saws. Any questions just let me know.