FOUND IT Pioneer P Series Fuel Cap

[Warped5]

Yep, need one of these fuel caps.

Not one of the later ones for Poulan Pro models, please ....

Thanks!

 

[DSS]

They're hard to find Ted. Is it missing or just swelled up? Leave it off the saw for a few days and they'll shrink back down. Must be the ethanol cause they didn't do that years ago.

I'll look but I don't think I have any either

 

[p61 western]

If sitting off the saw don't work you can put them in a zip lock bag and put them in the freezer for a few days and that works good. I had one so bad that I had to use channel locks to get it off. I think DSS is correct that it's the ethanol, this winter I stored mine with true fuel and had no problems.

 

[dall]

your talking about the black cap and not the gray one right ? i can see what i have

 

[Warped5]

They're hard to find Ted. Is it missing or just swelled up? Leave it off the saw for a few days and they'll shrink back down. Must be the ethanol cause they didn't do that years ago.

I'll look but I don't think I have any either

Thanks, Chris. Yes, this has been a problem with the cap on the PP BP655. The material is definitely different from the caps on the Pioneer saws.

If sitting off the saw don't work you can put them in a zip lock bag and put them in the freezer for a few days and that works good. I had one so bad that I had to use channel locks to get it off. I think DSS is correct that it's the ethanol, this winter I stored mine with true fuel and had no problems.

I will try the True Fuel solution until I source a proper cap! I am also using the channel lock solution today ....

your talking about the black cap and not the gray one right ? i can see what i have

Yep, the black Pioneer old-school Bakelite cap. Thank you for checking.

 

[p61 western]

You could also check Chainsawr, I have seen them there once in a while.

 

[dall]

i should have a couple extras i just want to make sure they are in good enough condition to send

 

[jacob j.]

If Dall doesn't have one then I'm pretty sure I do.

 

[mowertech37]

fyi everyone im putting a pioneer p26 on the bay parts saw

 

[rocketnorton]

p26, diff caps.

 

[dall]

How does it look

 

[DSS]

View attachment 57626 View attachment 57627 View attachment 57628

How does it look

It's making my nipples stiff. No pics. Pervert.

 

[p61 western]

It's making my nipples stiff. No pics. Pervert.

lmfao

 

[Warped5]

Dall, that looks excellent!

PM outbound to you ...

 

[Warped5]

It's making my nipples stiff. No pics. Pervert.

You're strange.

Don't know how Fred puts up with you.

 

[Warped5]

Deal done. Thanks Dall!

 

[DSS]

You're strange.

Don't know how Fred puts up with you.

Like you've never seen a nice fuel cap and got excited. Pfffffttttt

Don't make me tell the goat story

 

[Warped5]

Not caps, cans! CANS!

..... and No Spill Jill had some of the best fuel CANS out there!

 

[sostahoe]

Found this old thread, ! I am need of a fuel cap. Picked up a 655 at automotive swap meet. I have a running bp655. Was using for milling. Want to get new purchase making chips again ,,, need fuel cap , and looking for a long bar for mill use ??