WANTED Older Cannon Bar

[K Mueller]

Looking for a older/vintage Cannon bar That is 60” plus. Either Oregon or Roller Nose.

I have some sweet saws to trade or have cash.

Not my photo.

 

[jacob j.]

What mount do you need Kyle?

 

[K Mueller]

What mount do you need Kyle?

Ultimately I’ll need the Larger Stihl mount - 088 etc. I could take a different mount and open it up I suppose.

 

[srcarr52]

Ultimately I’ll need the Larger Stihl mount - 088 etc. I could take a different mount and open it up I suppose.

Probably not, most other bar mount patterns don't have a large enough tail to clear the Stihl large mount bar pad.

 

[jacob j.]

Ok, I'll take a look through the junk in my trunk in the next couple days.

 

[K Mueller]

Probably not, most other bar mount patterns don't have a large enough tail to clear the Stihl large mount bar pad.

Good to know, thanks. I’ve read where a few people have done it but must have went to 12mm and not the 14mm I’m thinking

 

[K Mueller]

Ok, I'll take a look through the junk in my trunk in the next couple days.

thanks JJ

 

[mdavlee]

You can do it but you have to pay attention to the oil holes and where the chain hits the sprocket real good. I know some guys were moving them all one direction but that eliminates being able to flip the bar.

 

[K Mueller]

TTT

 

[Lightning Performance]

Probably not, most other bar mount patterns don't have a large enough tail to clear the Stihl large mount bar pad.

Very true. Playing the game today with this bar for who knows what mount with a roller tip. Looks like old Mac to me. Needs to be on my 084 with a 10.8mm stud. This brings my extra large bow and others into the mix.
Also have one bar you sent me that might work on the big saw without a bar adapter plate. This opens the door to so many more options imo. I can take care of the rest on the bar end