ms362c build for the 12 saws of Christmas

[jmssaws]

This will be a spare time build so it will be a slow one. Would like to bounce around ideas so speak up if you have any.

 

[jmssaws]

Let's go all you builders! Let's get some threads started and have some fun.

 

[Magnumitis]

Awesome

 

[Four Paws]

Way to kick things off, Jason.

I see you removed the top handle...are you looking for some weight savings...or for more space to install additional displacement?

 

[drf256]

Cool saw.

 

[drf256]

This will be a spare time build so it will be a slow one. Would like to bounce around ideas so speak up if you have any. View attachment 20582

I'd try to fit an 880 jug under the hood.

You asked for ideas.

 

[jmssaws]

Way to kick things off, Jason.

I see you removed the top handle...are you looking for some weight savings...or for more space to install additional displacement?

Need room for the cylinder and plug to clear. Gonna have to run it one handed.

 

[jmssaws]

Cool saw.

Thanks doc!
I got it from a real dick!

 

[Definitive Dave]

a ported 362 is a totally different animal than a stock 362!!!

 

[jmssaws]

a ported 362 is a totally different animal than a stock 362!!!

I've never rana stock one.

 

[Definitive Dave]

very pedestrian saw in stock form, very capable in a ho hum kinda way, I would take a stock 036, MS360 or definitely a stock MS361 over a stock MS362

 

[Deets066]

I've never rana stock one.

Have you ever ran a ported one.

 

[jmssaws]

Have you ever ran a ported one.

Not yet.

 

[jmssaws]

My dad thought it was a 461. Freaking huge saw for the cc's

 

[Chris Zautner]

subbed...

 

[calebng15]

subbed...

What he said!

 

[Deets066]

Where's the build thread?

 

[jmssaws]

Where's the build thread?

I looked at the saw today. That's a start.

 

[David Young]

i'd start with purple power and water cut 50/50 and a toothbrush. get it sparkly nice to work on clean stuff. There is a brand new saw under that stuff. just don't let the purple set too long.

have recent experiences changed how you are going to approach this saw?

 

[junkman]

i'd start with purple power and water cut 50/50 and a toothbrush. get it sparkly nice to work on clean stuff. There is a brand new saw under that stuff. just don't let the purple set too long.

have recent experiences changed how you are going to approach this saw?

I was thinking carbide bits ,not a toothbrush