MASTER WORKS 18v Cordless Drill Charger??

[CrystalRiver1]

Hey Studs,

I found this 2010 MASTER WORKS "Pro Series" 18-Volt Cordless Drill...with No charger!

I don't won't to toss it out.
What type of charger will work for this series drill??
I figured something must be interchangeable.

Can't locate a match as of yet via Goggle...

Appreciate any help!
Blessings & Merry Christmas

Reggie

 

[whybother]

View attachment 442583View attachment 442584View attachment 442585View attachment 442585View attachment 442586View attachment 442587
Hey Studs,

I found this 2010 MASTER WORKS "Pro Series" 18-Volt Cordless Drill...with No charger!

I don't won't to toss it out.
What type of charger will work for this series drill??
I figured something must be interchangeable.

Can't locate a match as of yet via Goggle...

Appreciate any help!
Blessings & Merry Christmas

Reggie

Looks like ryobi to me. Pictured is an adapter for ryobi that allows the use of Dewalt or Milwaukee slide packs. If you need more pics or measurements I'd be happy to get them for you.

 

[CrystalRiver1]

Looks like ryobi to me. Pictured is an adapter for ryobi that allows the use of Dewalt or Milwaukee slide packs. If you need more pics or measurements I'd be happy to get them for you.
View attachment 442595

My best bet would be to match this up on Ebay or Amazon...as far as buying one?

 

[whybother]

I've had better luck on Amazon for cheap adapters like this. Looking at it closer you might need to remove the tab on the adapter as it may be in a slightly different location than the slot on your drill.
power tool batteries are funny, remove a bit here or there on the battery or the tool and alot of them will interchange. Not guaranteeing the ryobi one is correct for your application, but there are only a couple with the battery connection on the very outside edge like your drill appears to have.

 

[CrystalRiver1]

I've had better luck on Amazon for cheap adapters like this. Looking at it closer you might need to remove the tab on the adapter as it may be in a slightly different location than the slot on your drill.
power tool batteries are funny, remove a bit here or there on the battery or the tool and alot of them will interchange. Not guaranteeing the ryobi one is correct for your application, but there are only a couple with the battery connection on the very outside edge like your drill appears to have.

I certainly appreciate the advice for sure!!

 

[CrystalRiver1]

Mighty Tuff sledding on this old deal!

 

[whybother]

Post pics of the battery if you have it. Look up Dewalt battery adapters on Amazon and order a couple that look like they will fit. Find the one works and return it and order a battery charger instead of the adapter and you should be set.

 

[CrystalRiver1]

Post pics of the battery if you have it. Look up Dewalt battery adapters on Amazon and order a couple that look like they will fit. Find the one works and return it and order a battery charger instead of the adapter and you should be set.

I can't find the battery.
That's a great idea...appreciate it!

 

[pbillyi69]

i wish there would be some sort of agreement between tool maker and phone makers to make all of the batteries and charging cables universal.

 

[whybother]

i wish there would be some sort of agreement between tool maker and phone makers to make all of the batteries and charging cables universal.

Tool batteries can adapted fairly easily across the board, adapter prices very greatly so it pays to shop around. Phones are supposed to be all "C" port from now on. Unfortunately it took the .gov to get it done...

 

[pbillyi69]

Tool batteries can adapted fairly easily across the board, adapter prices very greatly so it pays to shop around. Phones are supposed to be all "C" port from now on. Unfortunately it took the .gov to get it done...

they are supposed to be c port but they can make the c port two different ways....femal on the cord or male on the cord...apple has male on the cord and samsung has the female on the cord.....hopefully they specified that they have to be the same way

 

[whybother]

they are supposed to be c port but they can make the c port two different ways....femal on the cord or male on the cord...apple has male on the cord and samsung has the female on the cord.....hopefully they specified that they have to be the same way

Interesting, wife's new apple phone has female cord end just like my Samsung so they interchange.

 

[pbillyi69]

it has happened since i bought my wife's new phone the last time which is an s21......im so happy