SOLD L77 Husqvarna bow bar

[Maintenance Chief]

 

[Maintenance Chief]

So pictures kind of say it all , its a fairly nice L77 Husqvarna , that I got from the original owner. I lightly restored this saw and fixed some existing issues that included - metering level of the carburetor needle ( new walbro kit installed) retaining washer/cup for the starter was worn and replaced with a factory replacement and a new Herr 8 tooth spur sprocket 3/8ths was used to replace the original worn out husqvarna sprocket.
The oil pump dust cover was slightly warped, I reheated it and it was bent back to original shape ( you can see my glove print in it though).

 

[Maintenance Chief]

The bow bar was probably never flipped so I spent alot!!! Of time hand dressing the rails and replaced the top guard. It comes with a new loop of .058 3/8 EXL Oregon chain.

 

[Maintenance Chief]

500.00 plus the ride.
I also have it listed locally but not Ebay.
Thank you
Ask anything about the saw and I'll give the most accurate information I can.

 

[Lee H]

Nice saw.

 

[Maintenance Chief]

The muffler is extremely nice ,no dents. I put a coat of 2000° header gloss black on it.

 

[Stump Shot]

@heimannm

 

[Maintenance Chief]

I have been contacted about a local sale, but won't know till this weekend.

 

[Maintenance Chief]

I didn't realize Mark was into old Husqvarna saws or I would have contacted him first.
He has been a tremendous help with some of my projects.

 

[Stump Shot]

I didn't realize Mark was into old Husqvarna saws or I would have contacted him first.
He has been a tremendous help with some of my projects.

I wouldn't go as far to say that he's into them, but is looking for a couple older ones to display.