SOLD Jonsered 630 $150 plus shipping and 670 $275 plus shipping

[Johnmn]

Thinning the heard some
First off is a saw jonsered never offered. It's a 630 with a 266 p&c.
New seals, o-rings, fuel line, Tilly 224 carb kitted. Timing advance and base delete. Saws runs good but piston does have some scratches on it. I'm guess they would sand out or slap in a new meteor. Priced Right do to scratches.
$125 plus shipping

Oh saw also has modified spring AV up front. And could probably use a new clutch spring, but I believe I have a few.

 

[Czed]

Thinning the heard some
First off is a saw jonsered never offered. It's a 630 with a 266 p&c.
New seals, o-rings, fuel line, Tilly 224 carb kitted. Timing advance and base delete. Saws runs good but piston does have some scratches on it. I'm guess they would sand out or slap in a new meteor. Priced Right do to scratches.
$125 plus shipping
View attachment 205450 View attachment 205451 View attachment 205452
Oh saw also has modified spring AV up front. And could probably use a new clutch spring, but I believe I have a few.

@DuratecMan10
This would make you a fine saw
My husqvarna version's have 24" bar's i run them in hardwood.

 

[Johnmn]

Next up is a 630 super saw has had seals, o-rings, fuel line and filter, timing advance and base delete. Saw runs and oils as it should.
$150 plus shipping

 

[Johnmn]

Next is a Jonsered 670, I believe I built this saw on 625 cases. New bearings, seals, o-ring, gaskets, carb kit, fuel line and filter. Timing advance, spring AV up front, probably 5 or 6 tanks since rebuild. Meteor piston
$275 plus shipping

Saw does not have those spikes anymore.
I'll grab a piston pic too.

 

[Johnmn]

630/266 is sold

 

[mortalitool]

dang nice saws bud

 

[Johnmn]

670 piston

 

[Johnmn]

Jonsered 670 fully rebuilt, bearings, seals, gaskets, fuel line and filter, carb kit, starter rope, o-rings, pop up piston.
Has timing advance and factory opening enlarged. Clean saw!
Not for sale!

 

[brad ruch]

630/266 is sold

Dam it I knew I should have.[emoji45]

Sent from my Pixel 2 XL using Tapatalk

 

[Johnmn]

Sorry can't do it

 

[Czed]

Sorry can't do it

You keeping it skippy?

 

[Johnmn]

You keeping it skippy?

Yea, I traded the 630/266 but I'll keep the rest. To much not to like about these saws!

 

[Czed]

Yea, I traded the 630/266 but I'll keep the rest. To much not to like about these saws!

I wouldn't part with that one
Never seen a nicer one.

 

[Johnmn]

I wouldn't part with that one
Never seen a nicer one.

I have a half wrap 670 that I got from the original owner. Only that makes it look not new is the missing sticker on the clutch cover. Its amazingly clean.

 

[USMC615]

Nice saws!