SOLD Jonesred 2094

[XP for Life]

I have a Jonesred 2094 for sale. The only reason I am selling it is that it currently does not have a working chain break assembly. I have been unable to find one anywhere. This saw was gone through top to bottom. Carb rebuild, new crank seals both sides, new fuel line and filter, new piston wrist pin bearing, new worm gear on the oiler, ported muffler with ceramic paint and I threw in a new Meteor piston for good measure. I have 4 tanks through this saw with no issues. Ran a 32” Sugi bar on it and had a blast. My brother, NorthcentralYooper did all the rebuild work for me. I can send a video of it running if you are interested. Didn’t list it as a parts saw because I felt it did it an injustice. $350 plus shipping for PH only.

 

[Dub11]

Do you have the clutch cover at all?

 

[XP for Life]

Sure do. Pic didn’t attach apparently.

M

Do you have the clutch cover at all?

 

[Dub11]

She got hawt! Lol.

Thanks.

 

[Armbru84]

Nice deal for a saw with all that work done to it.

 

[XP for Life]

It did. Shut her down after I saw what was going on. The brake assembly failed.....obviously.

She got hawt! Lol.

Thanks.

 

[Dub11]

Just run a 4ft bar that way it'll be to heavy to kick back lol.

With this popped up a month ago. GLWS.

 

[cgraham1]

Chain brakes are overrated, anyways.

It’s really too bad that parts are impossible to find for these saws.

 

[NorthcentralYooper]

Nice saw , lots of low end grunt on that one.

 

[NorthcentralYooper]

I remember the cylinder and piston were great shape

 

[cgraham1]

I had a 2095 for a while... didn’t run it much, but it would cold start on one pull, if I was fast enough to flip the choke off before it died.

 

[XP for Life]

Chain brakes are overrated. It wanted to stop and I didn’t want too. I may take Dub’s idea and put a 4’ bar on it and go for a ride.

Thanks for looking guys

I had a 2095 for a while... didn’t run it much, but it would cold start on one pull, if I was fast enough to flip the choke off before it died.

View attachment 122041

I had a 2095 for a while... didn’t run it much, but it would cold start on one pull, if I was fast enough to flip the choke off before it died.

View attachment 122041

Nice looking saw. They really are fun saws to run.

 

[Lightning Performance]

Can another clutch be swapped on it?
Is the drum and oil pump available?

 

[Drptrch]

I got parts recently from Chainsawr and and a sweet handle from Wayne.
Killer deal !!


Erik

 

[T.Roller]

This is a great deal on this saw. If I wasn't gathering a few parts for my 2100 I'd be all over it

 

[XP for Life]

Am going to try a few avenues to sell the saw as is. If not, I will be parting it out. The price goes up on parts.

 

[Lightning Performance]

Can another clutch be swapped on it?
Is the drum and oil pump available?

?
I have no clue but would use it for milling.

 

[huskyboy]

Can another clutch be swapped on it?
Is the drum and oil pump available?

I think a 394/395 clutch will work. Looks like it has a 288/2100 style on it and those fit on a 395.

 

[T.Roller]

Am going to try a few avenues to sell the saw as is. If not, I will be parting it out. The price goes up on parts.

This is a running complete saw besides the chain brake correct?

 

[T.Roller]

I think a 394/395 clutch will work. Looks like it has a 288/2100 style on it and those fit on a 395.

I'd say your right.