FOUND IT Husqvarna 576xp piston ass.

[timg]

Looking for new or good used guys. New oem's are pricey off the shelf. Would also like to hear from anybody who has used a Golf piston in this application. Thx as always. Timg

 

[Lnk]

Looking for new or good used guys. New oem's are pricey off the shelf. Would also like to hear from anybody who has used a Golf piston in this application. Thx as always. Timg

What happened to the original. Straight gassed?

 

[timg]

Pto bearing/seal leak lean out. I have a new oem jug just need a slug Larry.

 

[Lnk]

Pto bearing/seal leak lean out. I have a new oem jug just need a slug Larry.

That sucks. Couldn't clean the jug? Usually just some aluminum transfer.

 

[timg]

I've been thinking about a 757 Shindaiwa jug kit. You wanna help me out?LOL
If I sail this one it will be refreshed with new.

 

[Lnk]

I've been thinking about a 757 Shindaiwa jug kit. You wanna help me out?LOL
If I sail this one it will be refreshed with new.

Paul is the shindaiwa part hoarder. I have a spare 695, but no spare jugs. I would share if I had one.

 

[farminkarman]

It’s a bummer that Sawsalvage doesn’t have a piston in stock for the 576xp. Maybe you should hit up @Duke Thieroff for an eta?

 

[timg]

Yes, I've had good luck with the Teflon coated pistons Chris sells Greg. I don't think there is such a piston though. The chrome 576xp p&c kit he sells is about what an oem piston costs. Hopefully something will pop up.

 

[farminkarman]

Yes, I've had good luck with the Teflon coated pistons Chris sells Greg. I don't think there is such a piston though. The chrome 576xp p&c kit he sells is about what an oem piston costs. Hopefully something will pop up.

This is what I was thinking…especially knowing you have a good cylinder: https://www.sawsalvage.co/products/...ings-575-25-73-02?_pos=2&_sid=cd1af9186&_ss=r

 

[timg]

Thx for that!