brushwacker
Super OPE Member
- Local time
- 7:33 PM
- User ID
- 2485
- Joined
- Jan 18, 2017
- Messages
- 301
- Reaction score
- 406
- Location
- NW IN, USA
Has aluminum transfer on the spark plug. Feel a bit of resistance pulling it over but little for normal compression. Has spark but would not hit on prime. I believe it was straight gassed and it would take a new topend and little else to revive it or make a good parts saw. Pretty good plastics other then minor scuffs and scratches. Brake, starter, trigger and choke work smooth.
It's obvious to me the piston will be trash and the cylinder will need to be removed before it can be evaluated and I would not bank on it being usable so I didn't bother removing the muffler.
I scraped out most the grime and blew out what I could with air, wiped it off some but didn't give it a bath.
It's obvious to me the piston will be trash and the cylinder will need to be removed before it can be evaluated and I would not bank on it being usable so I didn't bother removing the muffler.
I scraped out most the grime and blew out what I could with air, wiped it off some but didn't give it a bath.
